Skip to main content
  • Home
  • Miracote Miraflex Membrane A 5 Gallon Pail - Gray

Mfr:Miracote

Miracote Miraflex Membrane A 5 Gallon Pail - Gray

(0)(0)
Item #: MCMEMBRANEA.5P*GR

Mfr. Part #: 7091-413

Q&A(0)

Miracote MiraFlex Membrane A is a unique polymer emulsion waterproofing designed for use beneath ceramic tile, marble, quarry tile, below grade, between slab and under Miracote composition floors and decks. Miracote MiraFlex Membrane A is recommended for tank lining in potab...

View More Details
In Stock

Available: 93

Location

Available

Anaheim, CA

68

Burbank, CA

3

Denver, CO

2

Ontario, CA

0

Salt Lake City, UT

0

San Diego, CA

4

San Marcos, CA

16

Calculate Material Usage:

Coatings Calculator

(*) Minimum Quantity: 1

Better Together

Buy all 3

Subtotal $407.50

About This Product

Details

Miracote MiraFlex Membrane A is a unique polymer emulsion waterproofing designed for use beneath ceramic tile, marble, quarry tile, below grade, between slab and under Miracote composition floors and decks. Miracote MiraFlex Membrane A is recommended for tank lining in potable water drinking systems. It is based on styrene butadiene latex that dries to form tough, water and vapor resistant film. The latex is water based, environmentally friendly and does not contain any solvent. It is non-toxic and can be used in conjunction with potable water.

Applied by roller, trowel, spray or squeegee, Miracote MiraFlex Membrane A offers water protection together with excellent adhesion and is more resistant to impact than most membranes. It is applied to floors and molded up onto bases, over curbs, etc. without the use of any adhesive other than its own composition. Among the surfaces MiraFlex Membrane A can cover are concrete, tile and metal. For wood surfaces, consult Crossfield Products Corp.

The final thickness of Miracote MiraFlex Membrane A is 25 mils dry (standard application, two applications of 23-25 mils wet) and 30 mils dry (polypropylene fabric reinforced). Laboratory tests have established that Miracote MiraFlex Membrane A will bridge concrete cracks up to 1/8” (3.2 mm) at temperatures as low as 0F. However, prudent design would assume that the product can be expected to bridge a crack of up to 1/16” (1.6 mm).

  • IAMPO Listed as a Shower Pan Liner
  • Forms a monolithic, tightly adhering, molded membrane across floors and up bases, curbs, etc.
  • Environmentally safe, VOC compliant
  • Stable under routine storage conditions (out of direct sunlight at temperatures above 0°C) for a period of 24 months from date of manufacture
  • Reduces reflective cracking, caused by substrate movement
  • Thin section does not interfere with building elevations
  • Unlike sheet goods, fluid applied membrane can easily be applied to irregular shapes
  • Quick drying – Touch dry in 1-2 hours, fully dry in 12 hours
  • Odorless
  • Choice of colors

Applications

As a waterproof membrane directly under seamless composition floors (Miracote or other), ceramic tile, quarry tile, marble, etc. For application as mechanical equipment room waterproofing or computer access floor waterproofing for below grade or between slab applications, consult separate Crossfield Products Corp. specifications.

Documents

Miraflex Part A Documents

Specifications

MiraFlex Membrane Part A Specifications

Q & A

true
Warning: This product contains chemical(s) known to the State of California to cause cancer and/or to cause birth defects or other reproductive harm.
For more information go to www.p65warnings.ca.gov

Ratings & Reviews

No reviews available

Be the first to Write a Review