Miracote MPC per Bag of 55 Pounds - Gray

(0) No Reviews yet

In Stock

Available: 421

Please order in multiples of 1

Miracote MPC

Miracote MPC (Multipurpose Protective Coating) is a polymerized two component, cementitious protective coating. That can be applied over a variety of surfaces including concrete, masonry, metal, wood, and tile. It consists of a unique rubber-like polymer liquid that is mixed with a proprietary cement and aggregate blend. Miracote MPC is then applied in two or more coats by trowel, brush, roller, spray or squeegee to a typical thickness of 1/16" (16mm). Designed for both exterior and interior use. Miracote MPC restores and protects concrete surfaces. From the consequences of exposure to water, chloride intrusion, freeze-thaw damage, and carbonation. Miracote MPC is an extremely durable, cost-effective protective coating that is "breathable" and allows for the transmission of inherent moisture vapor within concrete without blistering or de-lamination. By lowering moisture content within the concrete, Miracote MPC helps reduce the potential for corrosion of steel reinforcement.

Where to Use

Concrete Restoration and Protection projects - Resurfacing new concrete slabs that are flawed or discolored - Parking decks, columns, walls and ceilings - Bridge Parapets and Abutments - Renovations to Stadiums and Arenas - Resurfacing of balconies and breezeways - Driveway and sidewalk resurfacing - Pool decks and patios - Building entrances and stairs - Concrete and masonry water tank linings - Decorative floor finishes and microtoppings.


  • Moisture vapor permeable - reduces potential for corrosion
  • Protects against penetration of water, chlorides and CO2
  • Ideal for exterior/interior, pedestrian and vehicular traffic
  • Enhances appearance and curb appeal of concrete & masonry
  • Excellent adhesion to most substrates
  • Extensive choice of colors, textures and patterns

Technical Info

  • Working Life: 15-60 minutes (temperature dependent)
  • Recoat Time: 1-4 hours or when dry
  • Recoat Time: 1-4 hours or when dry
  • Adhesion ASTM C-882, Type 1: 515 psi
  • Tensile Strength ASTM C190: 450 psi
  • Compressive Strength ASTM C109: 2,440 psi
  • Water Vapor Permeability ASTM E96: 1.96 perms/in
  • Water Absorption Weight gain of 4" coated concrete cube after 21 days water immersion (CMCH): less than 2%
  • Freeze-Thaw Resistance - 50 Cycles: no scaling/peeling/flaking (Concrete cylinders immersed for 8 hrs in coated salt water solution followed by 16 hrs. of freezing).
  • Weathering ASTM G23: No visible degradation (Method I Procedure, 60 cycles)


  • School Cafeterias and Kitchens
  • School Locker Rooms and Restrooms
  • Hospital Cafeterias
  • Loading Docks
  • Plant Cafeterias
  • Pool Decks
  • Kitchens and Bathrooms
  • Driveways
  • Patios and Balconies
  • Garage Floors
  • Supermarkets
  • Restaurants
  • Lobbies
  • Shopping Malls
  • Automobile Dealerships
  • Stadium Concessions

Ratings & Reviews

No reviews available

Be the first to Write a Review