Skip to main content

Mfr: -

Xypex Concentrate per Pail of 60 Pounds - Gray

(0)(0)
Item #: XPCONCEN.60P*GR

Mfr. Part #: XYPEX CONCENTRATE – 60LB

Q&A(0)

Xypex Concentrate per Pail of 60 Pounds - Gray Xypex Concentrate is the most chemically active product within the Xypex Crystalline Waterproofing System. When mixed with water, this light grey powder is applied as a cementitious slurry coat to above-grade or below-grade conc...

View More Details

In Stock

Available: 28

Case Quantity: 1

Location

Available

Anaheim, CA

25

Burbank, CA

0

Denver, CO

0

Ontario, CA

0

Salt Lake City, UT

3

San Diego, CA

0

San Marcos, CA

0

(*) Minimum Quantity: 1

Better Together

Buy all 4

Subtotal $494.33

About This Product

Details

Xypex Concentrate per Pail of 60 Pounds - Gray

Xypex Concentrate is the most chemically active product within the Xypex Crystalline Waterproofing System.

When mixed with water, this light grey powder is applied as a cementitious slurry coat to above-grade or below-grade concrete, either as a single coat or as the first of a two-coat application. It is also mixed in Dry-Pac form for sealing strips at construction joints, repairing of cracks, faulty construction joints, and honeycombs. Xypex prevents the penetration of water and other liquids from any direction. This is by causing a catalytic reaction that produces a non-soluble crystalline formation within the pores, capillary tracts of concrete and cement-based materials.

Recommended for

  • Reservoirs
  • Sewage and Water Treatment Plants
  • Underground Vaults
  • Secondary Containment Structures
  • Foundations
  • Tunnels and Subway Systems
  • Swimming Pools
  • Parking Structures

Advantages

  • Resists extreme hydrostatic pressure
  • Becomes an integral part of the substrate
  • Can seal static hairline cracks up to 0.4 mm
  • Can be applied to the positive or the negative side of the concrete surface
  • Allows concrete to breathe
  • Highlyresistant to aggressive chemicals
  • Non-toxic / noVOCs
  • Does not require a dry surface
  • Cannot puncture, tear or come apart at the seams
  • No costly surface priming or leveling prior to application
  • Does not require sealing, lapping and finishing of seams at corners, edges or between membranes
  • Does not require protection during backfilling or during placement of steel, wire mesh or other materials
  • Less costly to apply than most other methods
  • Not subject to deterioration
  • Permanent
  • Available in white for enhanced illumination

Q & A

true

Ratings & Reviews

No reviews available

Be the first to Write a Review