Euclid Hey'Di K-11 50 Pound Bag - Gray

Name: Euclid Hey'Di K-11 50 Pound Bag - Gray
SKU: EUHDIK11-G.50B*GR
Price: 116.46 USD
Availability: BackOrder

(0)(0)

Item #: EUHDIK11-G.50B*GR

Mfr. Part #: TR2120650521

Q&A(0)

Roll Over To Zoom

$116.46

HEY'DI K-11 is a breathable, two-part, polymer-modified, cement-based system for waterproofing concrete and masonry. HEY’DI K-11 has a texture and consistency similar to concrete and may be brush or spray applied. HEY’DI K-11 becomes an integral part of the wall and waterpro...

View More Details

Tech Data SheetSafety Data Sheet

About This Product

Details

HEY'DI K-11 is a breathable, two-part, polymer-modified, cement-based system for waterproofing concrete and masonry. HEY’DI K-11 has a texture and consistency similar to concrete and may be brush or spray applied. HEY’DI K-11 becomes an integral part of the wall and waterproofs the negative or positive side through a crystallization process. HEY’DI SB is the bonding agent used with HEY’DI K-11. It improves adhesion and flexibility, and reduces the permeability of the system. HEY’DI K-11 must be allowed to cure before applying a finishing floor system.

Features & Benefits

Waterproofs a wide variety of surfaces including concrete, medium/heavy weight block, brick and shotcrete.

Applications

Below or above grade surfaces
Horizontal structural slabs
Foundations & basements
Tunnels
Dams & water reservoirs

Manholes
Sewage & water treatment plants
Interior/exterior
Spillways

Colors

Gray
White

Packaging

Euclid Hey'Di K-11 50 Pound Bag - Gray (this item)

Certifications

HEY’DI K-11 is certified by NSF/ ANSI Standard 61 for use in water/wastewater treatment facilities

Testing Standards

HEY’DI SB BONDING AGENT is approved for use by the Canadian MTQ

Limitations

Do not re-temper HEY’DI K-11.
Do not apply to frozen or frost filled surfaces or when temperature is below or expected to fall below 40 °F (4 °C) within 48 hours.
Do not apply HEY’DI K-11 at temperatures above 90 °F (32 °C), unless the surface has been fully saturated with water at the time the application begins.
HEY’DI K-11 is not designed as a wearing surface. Apply a protective topcoat before subjecting it to traffic.
When applied to the inside of open cisterns, tanks, pools, etc., do not fill with water for at least 7 days after application.
Ensure that adequate ventilation is available during the application and the full curing period when using HEY’DI K-11 containing HEY’DI SB BONDING AGENT in enclosed tanks or reservoirs. Allow minimum 7 days drying time before backfilling unless protection board is used.

Allow 7 days cure at 75 °F (24 °C) before covering or before the application of waterbased decorative coatings.
Do not apply coatings containing lime over HEY’DI K-11.
Allow minimum 7 days cure before placing HEY’DI K-11 in service.
When HEY’DI K-11 is used in areas exposed to chemicals or high-sulfate containing soils, consult technical service for specific recommendations.
Apply a test patch to evaluate performance and appearance on concrete or block substrates which have been subjected to contamination, efflorescence or chemical attack.
In all cases, consult the Safety Data Sheet before use.