Skip to main content
  • Home
  • SealBoss 1510 and 15X Accelerator Polyurethane Injection Grout Kit

Mfr: -

SealBoss 1510 and 15X Accelerator Polyurethane Injection Grout Kit

(0)(0)
Item #: WPB1510KIT.5GK

Mfr. Part #: -

Q&A(0)

SealBoss 1510 Water Stop Foam mixed with SealBoss 15x Accelerator is a hydrophobic water-activated, (hydroactive), water cut-off grout and foam seal grout based on a MDI polyurethane. The resin is 100% solvent free and 100% solids. The gel-time of the product is adjustable b...

View More Details
In Stock

Available: 132

Location

Available

Anaheim, CA

80

Burbank, CA

0

Denver, CO

0

Ontario, CA

2

Salt Lake City, UT

13

San Diego, CA

37

San Marcos, CA

0

1510.5P and 15X-5

(*) Minimum Quantity: 1

About This Product

Details

SealBoss 1510 Water Stop Foam mixed with SealBoss 15x Accelerator is a hydrophobic water-activated, (hydroactive), water cut-off grout and foam seal grout based on a MDI polyurethane. The resin is 100% solvent free and 100% solids. The gel-time of the product is adjustable by the mandatory adding of a certain percentage of SealBoss 15x Accelerator. A phthalate free formulation (F) is available. SealBoss 1510 WaterStopFoam is NSF/ANSI 61 Drinking Water Contact Approved.

Upon contact with water SealBoss 1510 WaterStopFoam reacts to a semi-flexible foam while expanding its volume 30 to 40 times based on accelerator concentration. The cured material is of a constant volume. Since water is not a component of the foam structure, the cured material is essentially not effected by water or dryness. The reacted material essentially does not shrink or swell.

Depending on the amount of accelerator added and the pressure of injection, SealBoss 1510 WaterStopFoam reacts to a dense, closed cell, semi rigid material or a more open cell, semi flexible product. For best waterproofing results the closed cell structure is desired. SealBoss 1510 WaterStopFoam is designed for sealing water leaks and cutting off gushing water. Due to the low viscosity of the material, SealBoss 1510 WaterStopFoam offers good penetration in hairline crack injection. The product can be used for the filling of voids, cracks, and honeycombing in stone or concrete structures, and can be applied as a nonshrink, high strength soil stabilization grout when used with a reduced accelerator ratio. The moisture content of the soil must be sufficient to ensure reaction. To achieve most satisfying and permanent results in certain applications, a combination of SealBoss 1510 WaterStopFoam with other systems of our product line may be advised.

Features & Benefits

NSF / ANSI 61 Certified Drinking Water ContactAdvanced Formulation
Up to 40 Times ExpansionSealBoss Product-Pump-Packer System Solution
Unregulated For TransportAdvanced Solvent Free MDI Formulation

Applications

Defective Concrete (Cracked or Honeycombed)Concrete Construction Joints & Cracks
Brick Construction, Geo FormationsPipe Intrusions
Waste Water Tanks, Water ReservoirsTunnels, Dams, Soil Stabilization
Sewers, Manholes, Utility Boxes

Coverage and Cure Time

Conditions: 20°C / 68°F
Gel TimeInduction TimeAccelerator %
70 sec30 sec10%
50 sec15 sec15%
30 sec5 sec25%

Packaging

SizePackaging SizeItem
5.5 gallon kitKit

SealBoss 1510 and 15X Accelerator Polyurethane Injection Grout Kit (this item)

  • (1) SealBoss 1510 Polyurethane Injection Grout 5 Gallon Pail (view item)
  • (1) Seal Boss 15X Accelerator .5 Gallon Pail (view item)

Applicable Standards

NSF / ANSI 61 Certified Drinking Water Contact

Warranty

SealBoss Corp. Products are for Professional Use. All recommendations, statements and technical data herein are based on tests we believe to be reliable and correct, but accuracy and completeness of said tests are not guaranteed and are not to be construed as a warranty either expressed or implied. User shall rely on his or her own information and tests to determine suitability of the product for the intended use and user assumes all risk and liability resulting from his or her use of the product. Nothing contained in any supplied materials relieves the user of the obligation to read and follow the warnings and instruction for each product as set forth in the current Technical Data Sheet, product label and Safety Data Sheet prior to product use. SealBoss Corp. warrants supplied / distributed products to be free of manufacturing defects. Seller’s and manufacturer’s sole responsibility shall be to replace that portion of the product of the manufacturer which proves to be defective. There are no other warranties by SealBoss Corp. of any nature whatsoever expressed or implied, including any warranty of merchantability or fitness for a particular purpose in connection with this product. SealBoss Corp. shall not be liable for damages of any sort, including remote or consequential damages resulting from any claimed breach of any warranty whether expressed or implied. SealBoss Corp. shall not be responsible for use of this product in a manner to infringe on any patent or any other intellectual property rights held by others. In addition, no warranty or guarantee is being issued with respect to appearance, color, fading, chalking, staining, shrinkage, peeling, UV damage, excessive temperature exposure, normal wear and tear or improper application by the applicator. Damage caused by abuse, neglect and lack of proper maintenance, acts of nature and / or physical movement of the substrate or structural defects are also excluded from the limited warranty. SealBoss Corp. reserves the right to conduct performance tests on any material claimed to be defective prior to any repairs by owner, general contractor, or applicator. Neither seller nor manufacturer shall be liable to the buyer or any third person for any injury, loss or damage directly or indirectly resulting from use of or inability to use the product. Recommendations and statements other than those contained in a written agreement signed by an officer of the manufacturer shall not be binding upon the manufacturer or seller. SealBoss Corp. reserves the right to change the properties of products without notice.

Documents

WPB1510KIT.5GK Documents

Specifications

SealBoss 1510 Specifications

Q & A

true

Ratings & Reviews

No reviews available

Be the first to Write a Review