Schnee-Morehead 5144 Vacuum Bag Sealant Tape 1/8" x 1/2" x 30' Roll

Tacky Tape SM5144 is a sealant tape developed for use in vacuum bagging. It has been formulated to outperform all tapes in its class. Initial tack is great and it will maintain an air-tight seal during the cure cycle and then strip clean from the mold during de-bagging.

Benefits

• User friendly; easy to apply by hand
• Ideal for oven or autoclave cure
• Has been shown to survive 30 debulking cycles
• Room temperature to 425°F (218°C) cure cycles
• Good adhesion to various films and tool surfaces
• Strips clean from tool surfaces
• Non-hazardous

Application:

Apply by hand to a clean dry tool or platen with release paper on top. When the sealant is in position remove the release paper and lay the film on top. Apply pressure by hand or roller on the sealant to obtain maximum adhesion and to ensure a positive vacuum. It is recommended to strip below 150oF (66oC) to minimize or reduce the parts from becoming warped. SM5144 can be stripped without leaving a residue on metal tool surfaces that have been cooled to room temperature.