Mfr:Epro

Epro E.STOP B (EproStop-BP) Roll

Name: Epro E.STOP B (EproStop-BP) Roll
SKU: EPESTOPB.RL*NA
Price: 19.99 USD
Availability: InStock

(0)(0)

Item #: EPESTOPB.RL*NA

Mfr. Part #: e.stop b

Q&A(0)

Roll Over To Zoom

$19.99

e.stop b is a moisture activated high sodium bentonite content based waterstop. e.stop b is an expanding strip waterstop designed to stop water infiltration through cast-in-place concrete construction joints. It expands upon contact with water to form a positive seal against...

View More Details

Tech Data SheetSafety Data Sheet

About This Product

Details

e.stop b is a moisture activated high sodium bentonite content based waterstop. e.stop b is an expanding strip waterstop designed to stop water infiltration through cast-in-place concrete construction joints. It expands upon contact with water to form a positive seal against the concrete. The key to e.stop b’s effectiveness is that it is highly expansive, which seals and fills voids in cracks and concrete.

Features & Benefits

Active swelling waterstop is fully encased in concrete to seal off water ingress
Fast and easy installation
Seals around pipe penetrations
Ideal when pouring against existing concrete
High resistance to hydrostatic pressure

Applications

Surfaces should be clean and dry. Remove all dirt, rocks, rust or other construction debris. Do not install e.stop b in standing water or on an iced substrate. Apply a continuous layer of e.stop primer along the substrate where e.stop b will be installed. Assure proper 3” (75 mm) concrete coverage will be maintained. Firmly press the entire length of e.stop b onto the adhesive. For best results apply e.stop b within 30 minutes of adhesive installation. e.stop primer may be applied to damp surfaces, but not in standing water.

At structural and pipe penetrations, cut into strips to fit around the penetration. Apply to adhesive and abut coil ends together. On irregular surfaces such as stone or rough concrete, make sure waterstop remains in direct contact with the substrate along the entire installation. There should not be any air gap between the waterstop and the substrate.

Packaging

16.67' x 3/4" x 1" roll (this item)

Limitations

Should be stored out of weather