TREMprime VB Plus Primer 3.4 Gallon Unit

Name: TREMprime VB Plus Primer 3.4 Gallon Unit
SKU: TRPRIMEVB.34U*NA
Price: 376.95 USD
Availability: InStock

(0)(0)

Item #: TRPRIMEVB.34U*NA

Mfr. Part #: 825203 800

Q&A(0)

Roll Over To Zoom

$376.95

Tech Data SheetSafety Data Sheet

About This Product

Details

TREMprime VB Plus Primer is a two component, modified epoxy system designed to seal concrete and reduce moisture vapor transmission on concrete slabs with elevated levels of moisture. TREMprime VB Plus has proven to reduce moisture vapor emissions and be resistant to damage from sustained high alkalinity up to pH 14, the highest level. TREMprime VB Plus meets or exceeds the requirements of ASTM F3010-13, “Standard Practice for Two-Component Resin Based Membrane-Forming Moisture Mitigation Systems”.

Features & Benefits

Reduces moisture vapor emission through concrete.
Exceeds requirements of ASTM F3010
Resistance up to 25 lbs MVER on Calcium Chloride Test (ASTM F1869)
Resistance up to 100 RH% on the RH Probe Test (ASTM F2170)

Resistant to high alkalinity, up to pH 14
Fast cure time
Low odor and non-flammable
High physical properties, chemical resistant

Applications

TREMprime VB Plus is compatible with all TREMproof PUMA for below grade waterproofing systems, Vulkem EWS systems, Tremco Vulkem vehicular and pedestrian systems, TREMproof 201/60, TREMproof 250GC, and TREMproof 6100.

Packaging

(1) TREMprime VB Plus Primer 3.4 Gallon Unit (this item)

Limitations

All surfaces must be sound, clean, dry, and free from contamination. A thorough wire brushing, grinding, sandblasting, or solvent cleaning may be required to expose clean, sound, virgin surfaces.
Not for use over expanded polystyrene, extruded polystyrene, tongue and groove decks, wood decks, poured in place gypsum, lightweight insulating concrete, cementitious wood fiber decks and coal tar pitch.
Any questions regarding drying times, coverage rates and unique application techniques regarding the individual primers should be directed to Tremco Technical Services or your local Tremco Sales Representative.
Do not apply over contaminated or damp surfaces.
Do not apply in falling precipitation or when precipitation is imminent.
Do not thin.

Material is to be applied when ambient, substrate, and material temperatures are between 50 °F (10 °C) and 90 °F (32 °C). Substrate must be at least 5 °F (3 °C) above the measured dew point temperatures to avoid dew point conditions.
Material to be applied when ambient temperatures are steady or falling to avoid outgassing of concrete.
Below-slab vapor retarder is recommended to assist with mitigation of vapor drive.
Material is not to be applied over moving joints or expansion joints.
Do not break down into smaller quantities.
Core testing to examine the slab for contaminants is not required but is highly recommended and is the responsibility of the owner or owner’s representative.
Concrete substrate must be cured for seven days prior to application.

Documents

TRPRIMEVB.34U*NA Documents

Specifications

TRPRIMEVB.34U*NA Specifications

Q & A

true