Simpson SET-XP with Nozzle per 22 Ounce Cartridge

Simpson SET-XP-N With Nozzle per 22 Ounce Unit

SET-XP epoxy anchoring adhesive is a high-strength formula for anchoring and doweling in cracked, uncracked concrete or in masonry applications. It is a two-part system with the resin and hardener being simultaneously dispensed and mixed through the mixing nozzle. When properly mixed, the adhesive will be a uniform teal color for easy post-installation identification.

Key Features

• 1:1 two-component, high-solids, epoxy-based anchoring adhesive formula
• Passed the demanding ICC-ES AC308 adverse-condition tests pertaining to elevated temperatures and long-term sustained loads
• Code listed under the IBC/IRC for cracked and uncracked concrete per ICC-ES ESR-2508
• Code listed under the IBC/IRC for masonry per IAPMO UES ER-265
• Code-listed equivalent to cast-in-place reinforcing bars governed by ACI 318 and IBC Chapter 19
• Suitable for use under static and seismic loading conditions in cracked and uncracked concrete and masonry
• Cure times: 24 hours at 70°F (21°C), 72 hours at 50°F (10°C)
• Easy hole-cleaning — no power-brushing required
• Suitable for use in dry or water-saturated concrete
• For best results, store between 45°F (7°C) and 90°F (32°C)
• Available in 8.5 oz., 22 oz. and 56 oz. cartridges for application versatility
• Manufactured in the USA using global materials
• SET-XP is code listed for installation with the Speed Clean DXS drill bits without any further cleaning (ICC-ES ESR-2508)
• Tested per ACI 355.4 and AC308