Sign In / Register
My Lists
Contact Us
Mfr:Sika Corp
Sikadur 22 Lo-Mod FS per 4 Gallon Unit
Mfr. Part #: 444479
Roll Over To Zoom
This is a hazardous item and will incur additional shipping charges at checkout.
Sikadur 22 Lo-Mod FS is a 2-component, 100% solids, moisture-tolerant, fast setting epoxy resin binder. It conforms to the current ASTM C-881, Type III, Grade 1, Class C and AASHTO M-235 specifications. Fast Setting for quick turn around Meets 3 h/1000 psi requirem...
View More Details
Tech Data Sheet
Safety Data SheetBetter Together
Buy all 4
- This ItemThis Item
$5.55 $6.31 Save $0.76 (12%)Sika Sikaflex 1A Polyurethane Elastomeric Joint Sealant and Adhesive - 10 Ounce Cartridge
About This Product
Details
Sikadur 22 Lo-Mod FS is a 2-component, 100% solids, moisture-tolerant, fast setting epoxy resin binder. It conforms to the current ASTM C-881, Type III, Grade 1, Class C and AASHTO M-235 specifications.
- Fast Setting for quick turn around
- Meets 3 h/1000 psi requirement when mixed as an epoxy mortar
- Tolerant to moisture both before and after cure
- Convenient easy mix ratio A:B = 1:1 by volume
- Excellent strength development
- Leveling viscosity for easy, efficient application of a broadcast overlay
- Successfully used in HFST applications. Refer to local DOT specifications for product acceptance
Usage
Use neat as the binder resin for a skid-resistant broadcast overlay, and also as the binder resin for epoxy mortar and concrete for patching and overlays.
Note: Part A of the Sikadur 22 Lo-Mod, Sikadur 22 Lo-Mod FS and Sikadur 21 Lo-Mod LV is a universal component of these three products.
Waiting/Recoat Times
| 60–64 °F (16-18 °C) | 65–69 °F (19-21 °C) | 70–74 °F (21-23 °C) | |
| Coat 1 | 4–4 ½ h | 2 ½–3 h | 2–2 ½ h |
| Coat 2 | 5 ½–6 h | 4 ½–5 h | 4 h |
| 75–79 °F (24-26 °C) | 80–84 °F (27-29 °C) | 85+ °F (29+ °C) | |
| Coat 1 | 2 h | 1.5 h | 1 h |
| Coat 2 | 3 h | 3 h | 2 ½–3 h |
| Average Substrate and Material Temperature. These set times were determined under laboratory conditions, actual set times may vary based on on-site conditions. | |||
Compressive Strength
| 40 °F(4 °C) | 73 °F (23 °C) | 90 °F (32 °C) | |
| 3 hours | - | 1750 psi | 3600 psi |
| 8 hours | 2000 psi | 4400 psi | 6400 psi |
| 1 day | 4500 psi | 6500 psi | 8000 psi |
| 3 days | 5500 psi | 7500 psi | 8500 psi |
| 7 days | 8500 psi | 8500 psi | 9000 psi |
| 14 days | 9000 psi | 9000 psi | 9000 psi |
| 28 days | 9000 psi | 9000 psi | 9000 psi |
| Material cured and tested at the temperatures indicated and 50 % R.H. | |||
Documents
Specifications
Q & A
Warning: This product contains a chemical known to the State of California to cause cancer and reproductive harm. For more information go to www.p65warnings.ca.gov