Aquafin InjectProECO-CUT 5 gallon Pail

Features and Benefits

Aquafin's InjectProECO-Cut is a high performance, hydrophobic polyurethane injection grout which cures to a rigid, durable, closed celled foam. It is designed to fill joints and cracks in concrete, as well as large voids in gravel layers and rock fissures. Due to its quick cure time it can also be used to stop active, high flow water leaks. When it comes in contact with water, the grout expands and quickly cures to a tough, flexible, closed-cell polyurethane foam that is generally unaffected by common corrosive environments and is not subject to shrinkage due to wet/dry cycles. InjectProECO grouts are all environmentally friendly and formulated without harmful phthalates or VOCs.

• Zero VOC’s - meets LEED criteria
• 100% solids, non-flammable, non-toxic permanent seal
• Hydrophobic - can be used in wet and dry environments
• Accelerator and resin stable to -40°F.
• Pumped as a single component
• Can expand more than 25 times initial volume
• Adjustable reaction times
• Excellent resistance and durability
• Pumps well even at lower temperatures
• Non-hazardous shipping

Application Information

During injection, the grout will follow the path of least resistance. When the material has stopped penetrating it will continue to expand against the confines of the crack/joint and compress within itself, forming a very dense, closed cell material stopping the leak.

Typical Applications

Any concrete structure with larger volume water leaks such as:

• Water retaining structures
• Foundations
• Wastewater treatment plants
• Manholes
• Concrete dams
• Tunnels
• Parking garages

Cure Rate

The reaction time can be adjusted by the addition of InjectProECO-ACCELERATOR-UNI (sold separately) into the base resin prior to pumping. The resulting profile is affected by temperature and the amount of moisture present.

Mixing

1. Mix both the resin (Component A) and accelerator (Component B) before combining.
2. Pour the desired amount of InjectProECO-Cut Resin Component A into a clean pail.
3. Measure the appropriate amount of InjectProECO-ACCELERATOR-UNI Component B and pour into the InjectProECO-Cut Resin, stirring until adequately mixed.

Packaging