Aquafin InjectProECO-SLV 5 Gallon Pail

Features and Benefits

Aquafin's InjectProECO-SLV is a closed cell, high performance, low viscosity polyurethane injection grout designed for sealing hairline and very fine leaking cracks in concrete. When it comes in contact with water, the grout has high expansion (+2000% free foam) and quickly cures to a tough, flexible, closed-cell polyurethane foam that is generally unaffected by common corrosive environments and is not subject to shrinkage due to wet/dry cycles.

• Zero VOC’s - meets LEED criteria
• 100% solids, non-flammable, non-toxic permanent seal
• Hydrophobic - can be used in wet and dry environments
• Very low viscosity allows injection into hairline and micro cracks
• Accelerator and resin stable to -40°F.
• Pumped as a single component
• Excellent elongation creates a tight seal in moving cracks
• Adjustable reaction times
• Non-hazardous shipping

Application Information

During injection, the grout will follow the path of least resistance. When the material has stopped penetrating it will continue to expand against the confines of the crack/joint and compress within itself, forming a very dense, closed cell material stopping the leak.

Typical Applications

• Filling hairline cracks and micro cracks in concrete structures
  

Cure Rate

The reaction time can be adjusted by the addition of accelerator into the base resin prior to pumping.

Mixing

1. Mix both the resin (Component A) and accelerator (Component B) before combining.
2. Pour the desired amount of InjectProECO-SLV Resin Component A into a clean pail.
3. Measure the appropriate amount of InjectProECO-ACCELERATOR-UNI Component B and pour into the InjectProECO-SLV Resin, stirring until adequately mixed.

Packaging