Sign In / Register
My Lists
Contact Us
Mfr:Aquafin
Aquafin InjectProECO CombiGrout 5 Gallon Pail
Mfr. Part #: 3IECG-05GP
Roll Over To Zoom
Features and Benefits Aquafin's InjectProECO Combi Grout is a slightly flexible, tough, closed cell, polyurethane injection grout designed for grouting into voids and cracks. When it comes in contact with water, the grout expands and quickly cures to a tough, flexible, c...
View More Details
Tech Data Sheet
Safety Data SheetBetter Together
Buy all 4
- This ItemThis Item
About This Product
Details
Features and Benefits
Aquafin's InjectProECO Combi Grout is a slightly flexible, tough, closed cell, polyurethane injection grout designed for grouting into voids and cracks. When it comes in contact with water, the grout expands and quickly cures to a tough, flexible, closed-cell polyurethane foam that is generally unaffected by common corrosive environments and is not subject to shrinkage due to wet/dry cycles.
- Zero VOC’s - meets LEED criteria
- 100% solids, non-flammable, non-toxic permanent seal
- Hydrophobic - can be used in wet and dry environments
- Accelerator and resin stable to -40°F.
- Expansion up to 20 times (free foam)
- Flexible and tough foam
- Pumped as a single component
- Adjustable reaction times
- Non-hazardous shipping
Application Information
During injection, the grout will follow the path of least resistance. When the material has stopped penetrating it will continue to expand against the confines of the crack/joint and compress within itself, forming a very dense, closed cell material stopping the leak.
Typical Applications
- Curtain grouting
- Void filling
Cure Rate
When mixed with water at a 1:1 ratio the typical initial reaction time is 20 seconds, with final reaction at approx. 3 minutes.
Typical Reaction Times | ||
| Percent (%) of InjectProECO-ACCELERATOR-UNI | Start of Reaction | End of Reaction |
| 5% | 20 sec. | 1 min. 42 sec. |
| 7% | 13 sec. | 1 min. 23 sec. |
| 8% | 15 sec. | 1 min. 12 sec. |
| 10% | 13 sec. | 59 sec. |
Expert Tips
|
Mixing
- Mix both the resin (Component A) and accelerator (Component B) before combining.
- Pour the desired amount of InjectProECO-CombiGrout Resin Component A into a clean pail.
- Measure the appropriate amount of InjectProECO-ACCELERATOR-UNI Component B and pour into the InjectProECO-CombiGrout Resin, stirring until adequately mixed.