Skip to main content
  • Home
  • Sikadur 55 SLV Epoxy Resin 3 Gallon Unit

Mfr:Sika Corp

Sikadur 55 SLV Epoxy Resin 3 Gallon Unit

(0)(0)
Item #: SIKDUR55SLV.3U*NA

Mfr. Part #: 648881

Q&A(0)

Sikadur 55 Super Low-Viscosity (SLV) is a 2-component, 100 % solids, moisture-tolerant, epoxy crack healer / penetrating sealer, having a fast tack-free time to minimize downtime. It is a super low-viscosity, high-strength adhesive formulated specifically for sealing both dr...

View More Details
In Stock

Available: 14

Location

Available

Anaheim, CA

5

Burbank, CA

0

Denver, CO

2

Ontario, CA

3

Salt Lake City, UT

0

San Diego, CA

4

San Marcos, CA

0

(*) Minimum Quantity: 1

About This Product

Details

Sikadur 55 Super Low-Viscosity (SLV) is a 2-component, 100 % solids, moisture-tolerant, epoxy crack healer / penetrating sealer, having a fast tack-free time to minimize downtime. It is a super low-viscosity, high-strength adhesive formulated specifically for sealing both dry and damp, existing, non-dynamic cracks. It conforms to the current ASTM C-881, Types I and II, Grade-1, Class-C* and AASHTO M-235 specifications. * except for gel time

  • Super low viscosity/low surface tension for excellent penetration into existing cracks
  • Seals existing cracks by gravity down to 2 mils (0.002” / 0.05 mm) in width
  • Prolongs life of cracked concrete
  • Penetrates and seals surface from water absorption, chloride-ion intrusion, and chemical attack (patent pending technology)
  • Improves concrete surface by reducing water and chloride intrusion
  • Can be open to traffic in 6 hours at 73 °F (23 °C)
  • High bond strength, even in damp cracks
  • U.S. Patent No. (pending) for ultra low viscosity healer/sealer to strengthen cracked concrete

Usage

  • Sikadur 55 SLV seals cracked concrete
  • For interior slabs and exterior above-grade slabs
  • For elevated horizontal decks, parking garages and other structures exposed to foot and pneumatic tire traffic

Mix 1 part Component ‘B’ to 2 parts Component ‘A’ by volume into a clean pail. Mix thoroughly for 3 minutes with Sika paddle or jiffy mixer on a low-speed (400–600 rpm) drill until uniformly blended. Mix only that quantity which can be used within its pot life.

Cure Time/Tack-Free Time

40°F (4°C)60°F (15°C)73°F (23°C)90°F (32°C)
> 11 h11 h6 h2.5 h

Compressive Strength

40°F (4°C)60°F (15°C)73°F (23°C)90°F (32°C)
1 day-320 psi (2.2 MPa)1,100 psi (7.6 MPa)4,800 psi (33.1 MPa)
3 days2,000 psi (13.8 MPa)6,500 psi (44.8 MPa)8,300 psi (57.2 MPa)8,000 psi (55.2 MPa)
7 days7,800 psi (53.8 MPa)10,400 psi (71.7 MPa)10,900 psi (75.1 MPa)8,300 psi (57.2 MPa)
14 days9,600 psi (66.2 MPa)11,000 psi (75.8 MPa)11,800 psi (81.4 MPa)10,000 psi (68.9 MPa)
28 days11,700 psi (80.7 MPa)12,000 psi (82.7 MPa)12,000 psi (82.7 MPa)10,000 psi (68.9 MPa)

Documents

Sikadur 55 SLV Epoxy Resin Documents

Specifications

Sikadur 55 SLV Epoxy Resin Specifications

Q & A

true
Warning: This product does not contain any chemicals known to the State of California to cause cancer, birth, or any other reproductive defects.
For more information go to www.p65warnings.ca.gov

Ratings & Reviews

No reviews available

Be the first to Write a Review