GE SCS1700 Sanitary Sealant Removable Tip 10 Ounce Cartridge

• Mold and mildew resistance
• 100% silicone
• One-part, acetoxy cure sealant
• Proven, long-term resistance to extreme temperatures, UV radiation, rain, snow, and wind with negligible change in elasticity
• Once cured, remains elastic in temperatures from -55°F (-48°C) to 300°F (149°C)
• Withstands short-term, intermittent exposure up to 400°F (204°C)
• Ultra-low VOC (volatile organic compounds).

• ±25% movement capability, with excellent extension and compression cycling.
• Easy hot and cold condition gunning and tooling
• Removable cartridge nozzle that can be transferred from one cartridge to the next for a consistent bead size
• Wide application temperature range from 40°F to 122°F
• Low-sag formula that remains in place until fully cured
• Work life of five to 10 minutes
• Tack free time of 30 minutes
• Full cure time of 24 to 48 hours

• For use as a seal around bathtubs, shower stalls, wall fixtures, sinks, and other bathroom fixtures including countertops, soap fixtures, air dryers and drains.
• For grouting and bedding some ceramic tiles.
• In interior and exterior applications where areas are prone to mold and mildew formation.

• Almond
• Clear
• White

• GE SCS1700 Sanitary Sealant Removable Tip 10 Ounce Cartridge (this item)

• ASTM C 920 Standard Specification for Elastomeric Joint Sealants; Type S, Grade NS, Class 25, Use A, G, O, NT
• TT-S-001543A Sealing Compound: Silicone Rubber Base (for Caulking, Sealing & Glazing in Buildings and Other Structures)
• TT-S-00230C Sealing Compound: Elastomeric Type, Single Component (for Caulking, Sealing & Glazing in Buildings and Other Structures)
• CCGSB-19.13-M87 Sealing Compound, One-Component, Elastomeric, Chemical Curing
• CGSB-19.22-M89 Mildew-Resistant Sealing Compound for Tubs and Tiles

SCS1700 is not recommended, to be applied, or used:

• For use underwater or in other applications where the product will be in continuous contact with water.
• For use in food contact applications.
• When painting of the cured sealant is desired unless appropriate specialized paint products are used such as GE SEC2400 SilShieldTM.
• For use on aquariums as leaching of the fungicide can occur.
• For use on surfaces with special coatings, such as mirrors, without testing and approval of the manufacturer of the article.

• Under exceedingly hot or cold conditions (see Sealant Typical Properties table).
• On wet, damp, frozen or contaminated surfaces.
• On excessively basic or acidic substrates.
• On concrete, marble, limestone, lead or lead coated surfaces.
• In designs or applications where the silicone is encapsulated and without access to atmospheric moisture needed to cure.