Miracote MiraPatch RM 1 Powder per 50 Pound Bag

Miracote MiraPatch RM 1 is a polymer-modified two-component smoothing, resurfacing compound for concrete floors and decks. Applied to any thickness from 3" to featheredge with superior adhesion to prepared substrates. MiraPatch RM 1 has very high compression strength and it can be left exposed to industrial-type traffic or covered with almost any type of floor covering - carpet, resilient tile, even the very hard troweled resin floor systems.

Compared to conventional concrete toppings, MiraPatch RM 1 has greatly improved adhesion, greater abrasion resistance, less shrinkage, greater resistance to water, salt penetration, and better tensile strength. MiraPatch RM 1 is Zero-VOC, virtually odorless, and environmentally safe. It requires no special training for installation and is easily handled by a handyman mason. It sets rapidly, can be applied over damp (not wet) surfaces, and can be installed at temperatures as low as 50°F (10°C).

• Low slump, trowel-grade consistency
• High abrasion resistance
• Excellent freeze/thaw & de-icing salt resistance
• Ideal trowel-applied mortar for horizontal surfaces
• Suitable for use in cast-in-place repair methods
• Two component – high polymer-to-cement ratio
• High compressive, flexural and tensile strengths
• Tenacious adhesion to prepared substrates
• Extendable with coarse aggregate for repairs > 3/4”
• Zero VOC - contributes to LEED credits
• Meets USDA and FDA compliance standards

Applications

• Concrete repairs on grade, above and below grade
• Horizontal, vertical and overhead surfaces
• Interior and exterior service conditions
• Structural repair applications
• Resurfacing and overlayment for concrete
• To level, pitch or slope irregular concrete surfaces