Sika Thorolastic 750 Smooth, 5 Gallon Pail (Previously MasterProtect EL 750 Smooth)

• Available in a broad range of colors and textures for design versatility
• Resists wind-driven rain, helps prevent water penetration into the substrate
• Breathable to allow water vapor to escape
• High elongation and recovery for durable performance over dynamic cracks.
• Excellent adhesion, bonds securely to substrate for long-term durability
• UV resistance provides excellent color retention for a long lasting attractive finish
• Excellent hiding power

• Textured formulations help improve aesthetics of irregular substrates
• Effective carbon dioxide diffusion barrier, protects embedded steel from corrosion
• Low VOC content for broad compliance across all regions
• Flexibility at very low temperatures makes it suitable for all climates
• Resistant to dirt pickup
• Also available in algae resistant (AA) formula for versatility

• Exterior
• Vertical surfaces
• Above grade
• Protecting and waterproofing

Substrates

• Concrete
• Masonry
• Cement Plaster
• Stucco
• EIFS
• Over Existing Coatings

• White

• MasterProtect EL 750 Smooth 5 gallon pail (this item)

• Do not apply when substrate or ambient temperature is 40° F (4° C) or below or is expected to fall below 40° F (4° C) within 24 hours after application.
• Do not apply if rain is expected within 24 hours of application.
• Do not use on interior applications, undersides of balconies, soffits, below-grade applications or for immersion service.
• Do not use where there may be hydrostatic water transfer from the backside of the substrate.
• Do not apply to improperly sealed substrates that are subject to rising dampness or migrating moisture.
• Not intended for use as a horizontal traffic-bearing coating.
• Elongation and crack-bridging abilities are reduced with textured grades.
• Application of non-elastomeric topcoats could reduce the performance properties of MasterProtect EL 750.
• Apply a 4 by 4 ft (1.2 by 1.2 m) test area to verify acceptable color, texture and adhesion before proceeding with any project. The test method for measuring adhesion is ASTM D 3359, Measuring Adhesion by Tape Method A. On the 0–5 scale, a minimum adhesion rating of 4A is required.

• Color formulas containing organic colorants are susceptible to fading in exterior applications. Refer to Technical Support for guidance.
• Do not thin the material.
• For professional use only; not for sale to or use by the general public.
• Make certain the most current versions of product data sheet and SDS are being used; visit www.master-builders-solutions. com/en-us to verify the most current versions.
• Proper application is the responsibility of the user. Field visits by Master Builders Solutions personnel are for the purpose of making technical recommendations only and not for supervising or providing quality control on the jobsite.