AVM Aussie Seal M per 10 Ounce Standard Cartridge - Gray

Aussie Seal M is an extra heavy duty, easy to install, Marine-Grade moisture cure polyether Sealant / Adhesive formulated for applications above the water line or after curing below the water line and in areas where solvent based materials are not tolerated.

Aussie Seal M is solvent free and contains no isocyanates. It will not shrink upon curing, will not discolor when exposed to U.V., and will not “out-gas” or bubble on damp surfaces as urethane sealants often do. The sealant has resilient elastomeric properties and excellent adhesion to most substrates. It can be used effectively in many difficult conditions, cures rapidly in dry or wet climates, (including under freshly poured concrete) and low temperatures compared to urethane based materials.

Applications

As a stand-alone sealant or adhesive or in conjunction with many types of waterproofing systems including Below grade bituminous and polyurethane membranes, HDPE Membranes, Acrylic and Urethane Deck Coatings, etc. Aussie Seal M was specifically designed to be used with AVM’s waterproofing systems including AVM System 100, Elasto Fiberdeck, AVM System 100 Forevercoat, Aussie Membrane 500, Aussie Membrane 502, Aussie Skin 550, Aussie Hot Rubber 570, Aussie Mate 580-AL, AVM System 650, AVM System 680, AVM System 700 and AVM System 750.