SikaTop 144 per 5 Gallon Unit

SikaTop 144 is a polymer-modified, 2-component, and cementitious coating. Designed for use on concrete, mortar, and masonry substrates. Easily applied by brush, roller, or spray equipment. This fine-textured, abrasion-resistant coating is used for protection against deicing salts and for dampproofing/waterproofing.

• Bond strength ensures superior adhesion
• Increases resistance of substrate to deicing salts
• No mix water needed, liquid co-polymer triggers special blend of cements, fillers, and admixtures
• Superior abrasion resistance
• No batching, factory proportioned unit ensures consistent composition and high quality. Non-flammable; low odor
• Easily applied to clean, sound substrates
• Approved for use in contact with potable water
• May be overcoated with Sikagard® protective coatings

Applications

• Use on grade, above, and below grade on concrete, masonry, and mortar
• Use on horizontal, vertical, and overhead surfaces, both interior and exterior
• Potable water tanks
• Use as a coating over newly repaired concrete to provide a monolithic/uniform appearance
• Use as a protective coating to reduce the affect of deicing salt on concrete
• Use as a protective coating for waterproofing, damp-proofing, and improved resistance to weathering
• Use on concrete and masonry substrates to improve abrasion resistance to foot traffic and light pneumatic-tire traffic
• Use to coat the backside of architectural curtain wall panels to prevent water intrusion from the outside

Packaging

Component A: 3.5 gal (13.2L) pail

Component B: 45 lb (20.4 kg) bag