Super Krete S-9300 Bond-Kote 50 Pound Bag - Gray

S-9300 Bond-Kote is a single-component, pre-blended product designed for use as a thin-set overlayment for concrete surfaces. S-9300 Bond-Kote eliminates the need to remove and replace old, damaged or deteriorated concrete by resurfacing it with a strong, flexible and highly durable coating. S-9300 Bond-Kote is ready-mixed and contains a dry version of S-1100 Liquid Concentrate copolymer, a special blend of proprietary components that ensure superior bonding to nearly any substrate.

S-9300 Bond-Kote has a proven success record in every type of climate and is unaffected by freeze/thaw conditions and salt treatments when used in the appropriate system. The delamination of waterproofing products is substantially or totally reduced when S-9300 Bond-Kote is used for the base coat in conjunction with S-1300 Pene-Krete. The product is available as S-9300 Bond-Kote Gray or S-9302 Bond-Kote White. This product can be applied over concrete with a gauge rake at 1/8" thickness and used as a stampable overlay for use with seamless textured mats.

Now you can texture Bond-Kote at 1/8”" thickness directly over properly prepared concrete substrates, and texture. This is it to create the look of slate, stone, tile, brick or wood. This multi-use product has an extended pot life of several hours. Bond-Kote was also the product used to create the famous pirate ship in Disney’s movie: “Pirates of the Caribbean: Dead Man’s Chest." The ship creators applied Bond-Kote directly over an existing 175 foot steel ship, they were impressed by its flexibility, its resistance to damage and deterioration. After being submerged in salt water during the two year filming period of the movie, and their ability to easily create the appearance of aged wood with it. Apply by the squeegee, gauge rake with 1/8"” cams, trowel, sprayer, brush or broom.

• Environmentally friendly and safe
• Ready-mix formula - Just add water!
• Superior bonding capabilities
• Extreme climate resistance
• Excellent freeze/thaw resistance
• Reduces moisture vapor emissions (MVT) through slabs
• Excellent for use as underlayment for other coatings and systems
• Repairs and resurfaces concrete cost effectively
• Can eliminate the need to replace concrete
• Flexibility
• Non-toxic
• Water-resistant
• Salt treatment resistant
• Non-reemulsifiable
• Easy to use
• Highly versatile
• Fire resistant
• Abrasion resistant

Applications

• 1/8" Overlay Stamping
• Interior/Exterior Applications
• Floor Leveling/Smoothing
• Concrete Patching/Repairing/Resurfacing
• Spalled/Deteriorated Conditions
• Sidewalk Restoration/Resurfacing
• Curb/Gutter Resurfacing
• Horizontal/Vertical/Overhead Applications
• Pedestrian/Vehicular Traffic Surfaces
• Renovation of Gypsum Underlayments
• Slip-Resistant Surfaces
• Asbestos Tile Encapsulation
• Crack Treatment System
• Spray-Texture/Skip-Trowel Finishes
• Recreational Surfaces
• Highways/Bridges
• Parking Decks
• Skate Park Renovation
• Concrete Restoration
• Warehouse Floors
• Pool Decks
• Swimming Pool Plastering
• Helicopter Landing Pads
• Driveways
• Loading Docks/Ramps
• Masonry Walls
• Decorative Surfaces
• Damp-proofing Applications
• Anywhere a new concrete surface is desired

Packaging

• 50 lb. bags

Limitations

• Super-Krete Products are to be applied only when surface temperatures are above 55°F and rising and not to exceed 100°F. SuperKrete Products are not to be applied when precipitation is expected within 24 hours following completion of application. Do not allow materials to freeze. Each Super-Krete product acts as an inherent part of a proven system. Super-Krete Products are professional, contractor grade products. Training in the use of these products is available. Consult a Super-Krete Products representative for information and assistance locating approved contractors in your area or for training class dates.