GE SilPruf NB SCS9000 Sealant 20 Ounce Sausage

• Single-component, neutral-cure, non-bleed, non-stain silicone sealant
• ±50% movement capability
• Repels dirt and resists streaking/staining
• Multiple colors
• Proven long-term resistance to extreme temperatures, UV radiation, rain, and snow with negligible change in elasticity

• ±50% movement capability, with excellent extension and compression cycling recovery
• Once cured, remains elastic in temperatures from -55°F (-48°C) to 250°F (121°C). Withstands short-term, intermittent exposure up to 350°F (177°C)
• Low VOC (volatile organic compounds) content
• Exceeds LEED program requirements

• Easy to apply and tool in hot and cold conditions
• Can be applied in temperatures as low as 40°F (4°C). Substrate surface should be less than 122°F (50°C)
• Primerless adhesion to most nonporous substrates and finishes
• Extended work life to allow time for placement and tooling
• Low-sag formula remains in place until fully cured

• SCS9000 SilPruf NB sealant bonds without a primer to most substrates, including glass, polycarbonate, plastic, wood, paint, aluminum, brick, concrete, and natural stone, and more.

• Aluminum Gray
• Black
• Bronze
• Dark Gray
• Light Gray
• Limestone
• Precast White
• White

• (1) GE SilPruf NB SCS9000 Sealant 20 Ounce Sausage (this item)

Other Sizes

• GE SilPruf NB SCS9000 Sealant Fixed Tip 10 Ounce Cartridge

• Clean Air Gold Certification
• Environmental VOC+ Product Certification
• GE Product Certificate SCS9000
• GE Product Certificate SCS9000 SilPruf NB
• Singapore Green Building Product Certificate--SCS9000 Silpruf

• ASTM C920 Standard Specification for Elastomeric Joint Sealants; Type S, Grade NS, Class 50, Use A, G, M, O
• TT-S-001543A Sealing Compound: Silicone Rubber Base (for Caulking, Sealing & Glazing in Buildings and Other Structures)
• TT-S-00230C Sealing Compound: Elastomeric Type, Single Component (for Caulking, Sealing & Glazing in Buildings and Other Structures)
• ISO 11600 - Type G & F - 25 LM

SCS9000 is not recommended:

• For use underwater or in other applications where the product will be in continuous contact with water.
• For use in food contact applications.
• When painting of the cured sealant is desired (unless appropriate specialized paint products are used).

SCS9000 should not be applied or used:

• As a structural adhesive in Structural Glazing applications
• Under exceedingly hot or cold conditions (see Sealant Application section for additional information).
• On wet, damp, frozen or contaminated surfaces.
• On excessively basic or acidic substrates.