Pac Poly Elasto-Glaze 6001ALHT per 1 Gallon Unit - Tan

Pac Poly Elasto-Glaze 6001ALHT per 1 Gallon Unit - Tan

Pacific Polymers Elasto-Glaze 6001 AL-HT is a moisture-cured, liquid applied, and polyurethane waterproofing sealant. Based on Aliphatic Isocyanates in combination with additives and pigments.

Benefits

• Aliphatic – UV stable
• Low VOC
• Moisture cured polyurethane
• Abrasion resistant

Application:

• ELASTO-GLAZE 6001AL-HT may be applied by all conventional means including spray equipment, rollers (1/4”- 3/8” nap), and brushes. Refer to the appropriate data sheet of the desired ELASTO-DECK 5000 system for the application rate of ELASTO-GLAZE 6001AL-HT.
• A fine dry and clean aggregate must be incorporated into the system to provide a slip resistant surface. GILLIBRAND SILVER SAND is preferred over white silica sand.
• ELASTO-GLAZE 6001AL-HT must not be applied at wet film thickness greater than 15 wet mils.
• Coverage Rate to achieve 10-mil DFT is 115 to 120 sq.ft. per gallon.
• Allow a minimum of 48 hour final cure time before coating is exposed to pedestrian traffic, 72 hours minimum for vehicular.