Meadows Intraguard Per 5 Gallon Unit

Meadows Intraguard Per 5 Gallon Unit

INTRAGUARD is a water-based, penetrating sealing compound for concrete and masonry surfaces. INTRAGUARD is water-repellent, specifically designed to reduce the intrusion of water and chlorides into the substrate. This proprietary blend of silane and siloxane penetrates into the pores of the concrete and masonry to reduce scaling caused by deicing salts as well as protecting vertical masonry surfaces from the ingress of water. Good concrete and concreting practices must be used, as INTRAGUARD will not be effective on improperly designed, placed or cured concrete.

Uses

INTRAGUARD protects concrete and masonry surfaces, including concrete parking lots, driveways, walkways, and vertical walls. The product is designed to provide lasting protection from de-icing chemicals and moisture intrusion. The product can be used on both horizontal and vertical surfaces. Suitable application include architectural concrete, concrete block, split-face block, pavers, stucco, porous and dense brick, clay tile, etc.

Features and Benefits

• When properly applied INTRAGUARD does not form a film – it penetrates the surface to form an integral barrier to reduce moisture penetration.
• Leaves no gloss or shine.
• Transparent, non-staining.
• Breathable – does not trap moisture.
• Reduces chloride penetration into concrete and masonry surfaces.
• Helps protect properly placed and cured concrete and masonry from scaling and freeze/thaw damage caused by de-icing chemicals.
• Water-based, VOC-compliant.
• Allows masonry to breathe.

Shelf Life

When stored indoors in original, unopened containers at temperatures between 40° – 90° F (4° – 32° C), optimum performance and best use is obtained within one year of date of manufacture.

Specifications

Complies with all current federal, state, and local maximum allowable VOC requirements, including National EPA VOC Emission Standard for Architectural Coatings, CARB, LADCO, OTC Phase I and II, and SCAQMD.