Miracote Miragard Drylook Water Based Sealer 5 Gallon Unit

• Non film-forming; does not alter surface appearance or texture.
• 100% vapor permeability - excellent breathability.
• Superior resistance to chloride ion ingress.
• Reduces potential for steel corrosion, spalling and scaling.
• High resistance to wind driven rain.
• Excellent UV stability.
• Forms a permanent physical and chemical bond to the substrate.
• Provides good oil repellency and resists staining.

• Displays superior UV resistance and stability.
• Penetrates deeply for long-lasting protection.
• Water-based - VOC less than 50 g/l – Contributes to LEED points.
• Acceptable for use in USDA facilities.
• Reduces efflorescence and resistant to alkali attack.
• Keeps substrates cleaner and easier to maintain.
• Minimizes floor care and maintenance costs.
• Meets the performance standards of NCHRP 244.
• No need to dilute on site and ready for use

• Seal sidewalks, parking decks, balconies, and plaza decks.
• Treat concrete bridges, runways, and highway pavements.
• Seal and protect microtoppings, brick masonry and natural stone.
• Concrete and masonry walls and facades.
• Architectural precast curtain wall panels.

• Steel reinforced concrete structures exposed to chloride ingress.
• New and existing structures.
• Concrete structures in marine and aquatic environments.
• Industrial and commercial concrete floor slabs

• Milky white

• (1) Miracote Miragard Drylook Water Based Sealer 5 Gallon Unit (this item)

Other Sizes

• Miracote Miragard Drylook Water Based Sealer 1 Gallon Unit

• Protect from freezing.
• Not intended for below-grade waterproofing applications.
• Not suitable for gypsum materials or non-masonry substrates.
• Will leave a residue on non-porous materials such as metal, glass, and previously coated surfaces. Protect as required, or clean ASAP.
• Overspray of this product may cause damage to shrubbery and plant life. Protect as required during the application process.

• Minimum and maximum ambient and substrate temperatures of 40°F (4.4°C) or 100°F (37.8°C), are required during application.
• Concrete must be minimum age of 14 to 21 days or has achieved 80% of design strength, depending on curing and drying conditions.
• Do not apply under the threat of rain within 6 hours of treatment.
• Do not apply on damp substrates.