Mfr: -

Eternabond Eternaprime Spray per 14 Ounce Unit

(0)(0)
Item #: ADEBEP.14OZ*NA

Mfr. Part #: -

$24.94

This is a hazardous item and will incur additional shipping charges at checkout.

Eternabond Eternaprime Spray per 14 Ounce Unit EternaPrime is an adhesive and surface conditioner intended to aid adhesion. EternaBond MicroSealant tapes, or other non- MicroSealant tapes such as butyl tapes and other self-adhesive seaming tapes. EternaPrime is also an exce...

View More Details

In Stock

Available: 30

Case Quantity: 12

Location

Available

San Diego

0

Anaheim

0

Denver

30

Salt Lake

0

Ontario

0

San Marcos

0

(*) Minimum Quantity: 1

About This Product

Details

Details

Eternabond Eternaprime Spray per 14 Ounce Unit

EternaPrime is an adhesive and surface conditioner intended to aid adhesion. EternaBond MicroSealant tapes, or other non- MicroSealant tapes such as butyl tapes and other self-adhesive seaming tapes. EternaPrime is also an excellent primer for use with self-adhered modified bitumen membranes. Use EternaPrime when surfaces to be bonded are very dirty (oxidized and cannot be easily cleaned), or dusty (like on a tar and gravel roof). EternaPrime will prepare the surface by coalescing all loose particles into a solid platform for the EternaBond tape to adhere to. EternaPrime allows EternaBond MicroSealant tapes to be installed in temperatures as low as -20°F (-29°C). EternaPrime also prepares most contaminated surfaces for tape application.

EternaPrime is designed to work with all EternaBond tapes and was specifically developed for preparation of surfaces when installing EternaBond tapes in low ambient temperatures from 40° F down to -20° F. It is also widely used as a coalescing agent on surfaces which have difficult to remove dirt or conditions which may encapsulate the EternaBond tape.

EternaPrime, based on a VOC exempt solvent, meets all federal standards for health and environmental safety

Recommended uses include, but are not limited to:

  • dirty surfaces which are difficult to clean completely (tar and gravel)
  • potentially loose surfaces (mortar)
  • porous surfaces (wood or concrete)
  • anytime the EternaBond tape is applied at temperatures below 40° F ambient
  • EternaPrime can be sprayed, rolled, or brushed onto surface (stir frequently).

Ratings & Reviews

No reviews available

Be the first to Write a Review