Titebond WeatherMaster per 10 Ounce Standard Cartridge - Translucent

Name: Titebond WeatherMaster per 10 Ounce Standard Cartridge - Translucent
SKU: TIWM-T.SC*TR
Price: 8.82 USD
Availability: InStock

(0)(0)

Item #: TIWM-T.SC*TR

Mfr. Part #: 44011A

Q&A(0)

Roll Over To Zoom

$8.82

Titebond WM per 10 Ounce Standard Cartridge - Translucent Titebond WeatherMaster Sealant has been specifically formulated to outperform all other sealant technologies, including silicones, tri polymers and urethanes. This superior polymer formula provides the best possible p...

View More Details

About This Product

Details

Titebond WM per 10 Ounce Standard Cartridge - Translucent

Titebond WeatherMaster Sealant has been specifically formulated to outperform all other sealant technologies, including silicones, tri polymers and urethanes. This superior polymer formula provides the best possible performance on siding, windows, doors and vents. In addition to offering permanent flexibility, it provides unbeatable adhesion to wood, masonry, PVC, fiber cement, siding/trim and most common building materials. WeatherMaster Sealant is available in over 175 colors, all of which match today’s popular siding colors, regardless of material or manufacturer. If touch-ups are necessary, it may be painted with a high-quality acrylic, water-based paint.* It is weather-resistant, extrudes in extreme weather conditions and is UV-resistant, making it the ideal choice for exterior applications. Safety is not compromised, as this sealant contains no solvents or isocyanates and is VOC-compliant.

Features and Benefits

OUTPERFORMS SILICONE, TRIPOLYMER AND URETHANE SEALANTS
APPLIES EASILY IN EXTREME WEATHER CONDITIONS
PERMANENTLY FLEXIBLE, WEATHER-TIGHT SEAL
MOLD AND MILDEW RESISTANT
CAN BE PAINTED WITH WATER-BASED (LATEX-BASED) PAINT ONE HOUR AFTER APPLICATION*
SUPERIOR POLYMER TECHNOLOGY
FILLS GAPS UP TO 1 INCH WIDE
UV-RESISTANT
UV-RESISTANT
COMPATIBLE WITH ALL TYPES OF FOAM

Application Guidelines

APPLICATION TEMPERATURE:	Above 0°F (-18°C)
SERVICE TEMPERATURE RANGE:	-75°F. to 300°F (-59°C to 149°C) white & colors, -75°F to 250°F (-59°C to 121°C) crystal clear (may discolor at higher temperatures), -40°F to 400°F (-40°C to 204°C) translucent
METHOD OF APPLICATION:	Cartridge/caulking gun
TOOLING TIME:	For a 1/4" bead, approximately 10-15 minutes, depending on temperature and humidity.
WORKING SURFACES:	Surfaces must be cleaned down to the original substrate and free from any material that may deter adhesion. It is the sole responsibility of the user to thoroughly test any proposed use with all substrates to determine project suitability prior to using product on your application. If application is for Kynar™ coated materials, use WeatherMaster Metal Roof Sealant.
PAINTING:	WeatherMaster is intended for exterior use. If used indoors, sealant may need to be painted*. Painting may occur one hour after application with a water-based (latex-based) paint. For other paint types, a compatibility test is recommended. To ensure neat sealant lines, mask areas adjacent to joints.
CLEANUP:	Uncured materials may be cleaned with isopropyl alcohol (white and colors). Mineral spirits or similar solvent (clear). After curing, excess sealant must be cut or scraped away. Follow solvent vendor’s precautions when using solvents.
COVERAGE:	Sealant Calculator
LIMITATIONS:	Air, sealant and surface temperature should be above 0°F(-18°C). WeatherMaster is intended for exterior use. If used indoors, sealant must be painted*. Painting may occur one hour after application with a water-based (latex-based) paint. For other paint types, a compatibility test is recommended. To ensure neat sealant lines, mask areas adjacent to joints. Always apply sealant in a bead form. Once sealant is applied, do not smear, feather or wipe with solvents. Once sealant is dry to the touch and does not transfer, remove masking tape. If joint depth exceeds 1/2”, use backing material. NOTE: Highly recommend using backer rod/backing material for all joints. Not designed for continuous submersion or use below the waterline. Store unused product in dry location at or below 80°F (27°C). Do not apply WeatherMaster Translucent to polycarbonate due to solvent cracking. Not for use with nail holes or butt joints. For questions, please call our Help Line at 1-800-347-4583

Q & A

true

Back