Mfr:AVM Industries
AVM Top Coat 620 AL 4.4 Gallon Kit (Part A 4 Gallons + Part B 0.4 Gallons)
Mfr. Part #: 620-AL
Roll Over To Zoom
AVM Top Coat 620-AL is a heavy duty, two component, fast setting, rapid curing, solvent free, high solids, hybrid aliphatic polyurea elastomeric membrane that provides long lasting protection to the coated surfaces. Top Coat 620 may be applied in single or multiple coats and...
View More DetailsBetter Together
About This Product
Details
AVM Top Coat 620-AL is a heavy duty, two component, fast setting, rapid curing, solvent free, high solids, hybrid aliphatic polyurea elastomeric membrane that provides long lasting protection to the coated surfaces. Top Coat 620 may be applied in single or multiple coats and can be installed in temperatures as low as 20°F (-7°C).
Features & Benefits
Heavy duty, two-component | Rapid-curing |
Solvent-free | High-solids |
Applications
Apply at the recommended coverage rate using a roller, notched squeegee, or trowel. When applying an aggregate coat, (sand layer) Apply the aggregate evenly at the appropriate rate into the wet coating and if desired, back-roll. (see AVM System 620 installation instructions). |
Coverage and Cure Time
Coverage | 100 Sq.Ft./Gal |
Cure Time | 2-4 hours @ 75°F (24°C) and 50% relative humidity |
Please note: Cure time will vary depending on temperature and humidity. If more than 24 hours passes between coats, reprime surface with AVM Primer 400, Primer 410, or Primer 680. |
Clean Up
All cleanup should be done in accordance with local regulations. |
Limitations
The following conditions must not be coated with AVM Top Coat 620 AL: | |
Split slabs | Buried membrane |
Sandwich slabs with insulation | Slabs over unvented metal pan |
Magnesite | non-structural lightweight concrete |
Warranty
Contact AVM Industries for warranty details. |
Documents
Specifications
Q & A
For more information go to