Mfr: -
Xypex Modified per Pail of 60 Pounds - Gray
Mfr. Part #: XYPEX MODIFIED – 60LB
Roll Over To Zoom
Xypex Modified per Pail of 60 Pounds - Gray XYPEX MODIFIED can be applied as a second coat to reinforce Xypex Concentrate, or applied by itself to damp proof the exterior of foundation walls. Applied as a second coat, Xypex Modified chemically reinforces Xypex Concentrate wh...
View More DetailsBetter Together
About This Product
Details
Xypex Modified per Pail of 60 Pounds - Gray
XYPEX MODIFIED can be applied as a second coat to reinforce Xypex Concentrate, or applied by itself to damp proof the exterior of foundation walls.
Applied as a second coat, Xypex Modified chemically reinforces Xypex Concentrate where two coats are required and produces a harder finish. Where dampproofing is required, a single coat of Modified may be used as an alternative to a spray/tar emulsion. Xypex prevents the penetration of water and other liquids from any direction by causing a catalytic reaction that produces a non-soluble crystalline formation within the pores, capillary tracts of concrete and cement-based materials.
Compliance
Xypex Admix C-5000 complies with the requirements of:
- AS/NZS 4020:2005, Testing of products for use in contact with Drinking Water
Applications
Xypex Modified is recommended as a single coat for the dampproofing of foundations or as a second coat with Xypex Concentrate for the following applications
- Reservoirs
- Sewage and Water Treatment Plants
- Secondary Containment Structures
- Tunnels and Subway Systems
- Basements
- Foundations
- Parking Structures
- Swimming Pools
- Roof Decks
Advantages
- Resists extreme hydrostatic pressure from either positive or negative surface of the concrete slab
- Chloride protection in marine environment
- Becomes an integral part of the substrate
- Allows concrete to breathe
- Highly resistant to aggressive chemicals
- Non-toxic
- Does not require dry weather or a dry surface
- Cannot puncture, tear or come apart at the seams
- No costly surface priming or leveling prior to application
- Does not require sealing, lapping and finishing of seams at corners, edges or between membranes
- Can be applied to the positive or the negative side of the concrete surface
- Does not require protection during backfilling or during placement of steel, wire mesh or other materials
- Less costly to apply than most other methods
- Not subject to deterioration
- Permanent