Titebond Ultimate MP Sealant per 10 Ounce Standard Cartridge

Name: Titebond Ultimate MP Sealant per 10 Ounce Standard Cartridge
SKU: TIUMP.SC
Price: 8.72 USD
Availability: BackOrder

(0)(0)

Item #: TIUMP.SC

Mfr. Part #: -

Q&A(0)

Roll Over To Zoom

$8.72

Titebond Ultimate MP Sealant per 10 Ounce Standard Cartridge Titebond WeatherMaster ULTIMATE MP Sealant is specifically formulated to outperform all other sealant technologies, including VOC solvent, silicones, tripolymers, and urethanes. It offers unbeatable adhesion to al...

View More Details

About This Product

Details

Titebond Ultimate MP Sealant per 10 Ounce Standard Cartridge

Titebond WeatherMaster ULTIMATE MP Sealant is specifically formulated to outperform all other sealant technologies, including VOC solvent, silicones, tripolymers, and urethanes. It offers unbeatable adhesion to aluminum, painted metal, PVC, concrete, wood, masonry, vinyl, glass, plastic, steel, asphalt roofing, and most common building materials. Titebond WeatherMaster ULTIMATE MP Sealant adheres well to damp surfaces and provides a weather-tight seal against water, wind, dust and dirt.

Features and Benefits

Outperforms silicone, Tripolymer and Urethane sealants
Compatible with all types of foam
UV-Resisant and VOC-complaint
Applies easily in extreme weather conditions

Application Guidelines

APPLICATION TEMPERATURE:	Above 0°F (-18°C)
SERVICE TEMPERATURE RANGE:	-75°F to 300°F (-59°C to 149°C) white & colors, -40°F to 350°F (-40°C to 177°) translucent
METHOD OF APPLICATION:	Cartridge/caulking gun, bulk/sausage gun
TOOLING TIME:	For a 1/4” bead, approximately 10-15 minutes, depending on temperature and humidity
WORKING SURFACES:	Surfaces must be cleaned down to the original substrate and free from any material that may prevent adhesion. It is the sole responsibility of the user to thoroughly test any proposed use with all substrates to determine project suitability. To ensure neat sealant lines, mask areas adjacent to joints. Once the sealant is dry to the touch and does not transfer, remove the masking tape. Not for use with nail holes or butt joints. Not designed for continuous submersion or use below the waterline.
PAINTING:	WeatherMaster ULTIMATE MP is intended for exterior use. If used indoors, sealant may need to be painted*. Painting may occur two hours after application with a high-quality acrylic, water-based (latex-based) paint. For other paint types, a compatibility test is recommended.
CLEANUP:	Uncured material may be cleaned with isopropyl alcohol.† After curing, excess sealant must be cut or scraped away. Follow solvent vendor’s precautions when using solvents.
STOERAGE:	Store unused product in tightly closed container, in a dry location at or below 75°F (27°C).
LIMITATIONS:	Air, sealant and surface temperature should be above 0°F(-18°C).WeatherMaster ULTIMATE MP Sealant is intended for exterior use. If light colors are used indoors, sealant must be painted.* Painting may occur two hours after application with a water-based (latex-based) paint. For other paint types, a compatibility test is recommended. Once the sealant is applied, do not smear or feather sealant to a thin film unless it is painted due to accelerated aging under UV exposure. Do not wipe with solvents or tool with soap or alcohols. To ensure neat sealant lines, mask areas adjacent to joints. Always apply sealant in a bead form. Once sealant is dry to the touch and does not transfer, remove masking tape. If joint depth exceeds 1/2”, use backing material. NOTE: Highly recommend using backer rod/backing material for all joints. Not designed for continuous submersion or use below the waterline. Store unused product in dry location below 75°F (24°C). Do not apply ULTIMATE MP Translucent to polycarbonate due to solvent cracking.