Super Krete S-1800 Super-Stamp 50 Pound Bag - White

S-1800 Super-Stamp is a single-component, cementitious product designed to create the look of natural stone, and any other desirable textures over existing concrete. S-1800 Super-Stamp is a ready-mix proprietary blend of a specially modified water-resistant, acrylic co-polymer resin mixed with various sized aggregates formulated to maintain a 1/4" thick profile that can be stamped or textured using specially designed tools and templates.

S-1800 Super-Stamp eliminates the need to remove and replace concrete whether new or old while beautifying and increasing curb appeal. S-1800 Super-Stamp is a revolutionary 1/4" overlay product because other 1/4" overlay products require a "wet-on-wet" application. S-1800 Super-Stamp does not require the use of a bond coat primer.

S-9500 Color Stain can be applied over the finished stamped product to create a natural look that resembles true stone, or a custom colored appearance. For more information on our 1/4" Stampable Overlay System, please refer to the 1/4" Stampable Overlay System Datasheet. This product is available in gray, (S-1800 Super-Stamp Gray) or white, (S-1801 Super-Stamp White). This product is designed to be part of a system and is not intended to be used alone.

• Ready-mix formula - just add water
• Requires no bonding agent or primer coat
• Resistant to extreme temperature conditions
• Non-reemulsifiable
• Non-toxic
• Can eliminate the need to replace concrete
• Exceptional pot life
• OSHA compliant, contains no ingredients required to be listed by OSHA 1910 1200
• Superior bonding capabilities
• Excellent freeze/thaw resistance
• Water resistant
• Environmentally friendly and safe
• Highly versatile
• Easy to use
• VOC compliant

Applications

• Interior/Exterior Applications
• Concrete Patching/Repairing/Resurfacing
• Horizontal/Vertical Applications
• Pedestrian/Vehicular Traffic Surfaces
• Planter Curbs/Walls
• Driveways
• Concrete Restoration
• Theme Parks
• Hotels and Leisure Areas
• Commercial/Residential use
• Spalled/Deteriorated Conditions
• Slip-resistant Surfaces
• Sidewalks/Curbs
• Pool Decks
• Masonry Walls
• Restaurants
• Malls
• Leveling Low Spots/Regrading
• Anywhere a textured, decorative surface is desired

Packaging

• 50 lb. bags

Limitations

• Super-Krete Products are to be applied only when surface temperatures are above 55°F and rising and not to exceed 100°F. SuperKrete Products are not to be applied when precipitation is expected within 24 hours following completion of application. Do not allow materials to freeze. Each Super-Krete product acts as an inherent part of a proven system. Super-Krete Products are professional, contractor grade products. Training in the use of these products is available. Consult a Super-Krete Products representative for information and assistance locating approved contractors in your area or for training class dates.