Mfr:SealBoss
Seal Boss Corner Surface Port 1/4"
Mfr. Part #: BP-SP-CORNERPLASTIC / BP-SPEPTRICAPLONG
Roll Over To Zoom
This Corner Surface Port has a perforated base for improved adhesion and a 1/4″ stem/nozzle to quick connect to nylon extension tube or a static mixer. The port is glued to the substrate with SealBoss 4500 Epoxy paste adhesive.Durable plastic design corner surface port suita...
View More DetailsAbout This Product
Details
This Corner Surface Port has a perforated base for improved adhesion and a 1/4″ stem/nozzle to quick connect to nylon extension tube or a static mixer. The port is glued to the substrate with SealBoss 4500 Epoxy paste adhesive.
- Durable plastic design corner surface port suitable for epoxy injections.
- Corner base design with perforation holes for best possible adhesion with SealBoss 4500 Epoxy Paste Adhesive.
- Caps included.
- For EP grouts.
A surface port is a surface-mounted version of packer for lower injection pressures and circumstances where drilling into the substrate is not possible. Surface ports are typically used for epoxy injection. Surface ports are commonly used for epoxy injection at relatively low injection pressures.
These ports are glued to the surface or glued inside a drill hole. Many surface ports have an open/valve free design to work with quick release connectors with a multiple port injection option. They are typically supplied with caps to prevent epoxy backflow. There are also surface ports with a zerk fitting for a very secure fit at higher injection pressures. We also offer corner ports for placement in 90-degree construction corners.