This is a hazardous item and will incur additional shipping charges at checkout.
EVERCLEAR is a pure acrylic concrete cure & seal that protects and enhances the appearance of cured concrete with a clear, non-yellowing seal that is harder and more durable than standard cure and seal products. EVERCLEAR is specially formulated to enhance the color of stamp...
EVERCLEAR is a pure acrylic concrete cure & seal that protects and enhances the appearance of cured concrete with a clear, non-yellowing seal that is harder and more durable than standard cure and seal products. EVERCLEAR is specially formulated to enhance the color of stamped concrete, exposed aggregate, and colored concrete pavers, making these surfaces look deeper and richer in appearance. It provides protection against the damaging effects of traffic, weather, and de-icing salts while allowing the concrete to “breathe”. EVERCLEAR gives concrete a satin finish that highlights the color and texture of surfaces without excessive shine. EVERCLEAR can be tinted with Euclid Universal Color Packs, which are available in 33 standard colors.
Features & Benefits
Pure acrylic formulation ensures no yellowing and a more breathable seal
Enhances the appearance of colored concrete
Harder and more durable than standard polymer blend cure & seals
Can be tinted with Euclid Universal Color Packs to even out variegated concrete surfaces
Driveways and sidewalks
Decorative concrete overlays
Light Castle Gray
Euclid EverClear 5 gallon unit (this item)
ASTM C1315, Type 1, Class A
ASTM C309, Type 1, Classes A & B
Keep EVERCLEAR away from open flames, sparks, or other sources of ignition
If using EVERCLEAR indoors, ensure adequate fresh air ventilation and block all HVAC ducts which may distribute solvent odor.
Extinguish any pilot lights or other sources of ignition prior to starting EVERCLEAR application.
EVERCLEAR will not freeze in storage, but should be allowed to reach at least 50 °F (10 °C) before use
Surface and ambient temperature during coating applications should be between 40 °F and 90°F (4 °C and 32 °C)
Do not apply EVERCLEAR to frost-filled or frozen substrates
Do not apply EVERCLEAR in hot direct sunlight
Do not apply EVERCLEAR over bleed water or free-standing water
Do not apply EVERCLEAR if rain or heavy fog is expected within 12 hours of application
Do not thin EVERCLEAR
EVERCLEAR is not resistant to gasoline or other automotive fluids
EVERCLEAR will enhance color and darken substrates
Excessive build up of EVERCLEAR or puddling of the product during application can lead to failure to dry completely, bubbling, whitening, peeling and/or flaking of the sealer, and discoloration of the concrete
Applying thicker than recommended, applying in cool/cold weather, prolonged exposure to moisture (high humidity, rain), or lack of air flow may result in the sealer remaining soft/wet/tacky for longer than the times found on this data sheet
When floor covering adhesives will be used following EVERCLEAR application, a test area is recommended to ensure compatibility of the adhesive with EVERCLEAR
Application of a test area is strongly recommended to confirm final appearance and texture of the product with the end user
In all cases, consult the product Safety Data Sheet before use
Q & A
Warning: This product contains a chemical known to the State of California to cause cancer and reproductive harm. For more information go to www.p65warnings.ca.gov