BRM Denver Foam Mini Bag - 7/8" x 100' per Bag
Mfr. Part #: IEAA078M
Roll Over To Zoom
Denver Foam is an open cell polyurethane backer rod serving as a backing for elastomeric and other applied caulking sealants.Denver Foam controls the amount of sealant required and depth of the installation. Also, it forms the correct hour glass shape of sealant, assuring th...View More Details
About This Product
Denver Foam is an open cell polyurethane backer rod serving as a backing for elastomeric and other applied caulking sealants.
Denver Foam controls the amount of sealant required and depth of the installation. Also, it forms the correct hour glass shape of sealant, assuring the contractor and owner the best adhesion and cohesion configuration possible.
Denver Foam is chemically inert and resists oil, gasoline and most solvents. The material is odorless and will not stain. The open cell construction eliminates the out-gassing and cold flow problem associated with closed cell polyethylene Backer Rods. The sealant also has the benefits of a 2-sided cure.
For use in expansion/construction joints in concrete and precast concrete walls, floors, partitions, bridge construction, parking decks, curtain walls, glazing, log home construction, highway construction, and pavement maintenance.
New highway construction and pavement maintenance can be installed with Denver Foam. Denver Foam can withstand the temperature of hot pour sealant in maintenance work. Denver Foam is an open cell backer rod allowing air to reach both sides of sealant, assuring you the required complete cure. Most of these joints are saw cut and approximately 3/8" wide. The design depth keeps the sealant below traffic contact and vacuum lift created by fast moving vehicles.