Skip to main content
  • Home
  • SpecSeal Intumescent Firestop Plugs - 4"

Mfr:STI Firestop

SpecSeal Intumescent Firestop Plugs - 4"

(0)(0)
Item #: SSFP400.EA*NA

Mfr. Part #: FP400

Q&A(0)

SpecSeal FP Intumescent Firestop Plugs are soft and supple, foam plugs molded from polyurethane. Plugs are conveniently sized to fit 2 in (51 mm) or 4 in (102 mm) diameter openings or sleeves fabricated from electrical metallic tubing (EMT). The intumescent plugs expand when...

View More Details

In Stock

Available: 10

Case Quantity: 10

Location

Available

Anaheim, CA

0

Burbank, CA

0

Denver, CO

10

Ontario, CA

0

Salt Lake City, UT

0

San Diego, CA

0

San Marcos, CA

0

(*) Minimum Quantity: 1

About This Product

Details

SpecSeal FP Intumescent Firestop Plugs are soft and supple, foam plugs molded from polyurethane. Plugs are conveniently sized to fit 2 in (51 mm) or 4 in (102 mm) diameter openings or sleeves fabricated from electrical metallic tubing (EMT). The intumescent plugs expand when exposed to heat to quickly close off around combustible jacketed cables.

The SpecSeal FP500D Firestop Plugs are conveniently sized to fit 5 in. (127 mm) diameter openings or steel sleeves. When exposed to heat they quickly close off 1-1/2 in. or 2 in. Trade Size ABS, PVC, Steel or Iron drain pipes.

  • Intumescent - expands in all directions
  • Reinstallable - easy retrofitting of cables
  • Easy to install - no special tools required
  • Soft and resilient foam - conforms to cable & pipe surfaces
  • Paintable - can be painted to match surroundings

Applications

  • Blank Opening
  • Cables

SpecSeal FP Intumescent Firestop Plugs are designed for temporary or permanent sealing of single or grouped cables, metallic and non-metallic pipe penetrations, and blank openings through common construction such as concrete or gypsum board.

Specifications

The firestopping system shall utilize an intumescent foam plug having a nominal density of 19 pcf. The plug shall expand a minimum 10 times. The one-piece product shall be sized to fit the inside diameter of the opening or sleeve. The plug shall be UL Classified and tested to the requirements of ASTM E814 (UL1479) and CAN/ULC-S115.

Test Standards

  • ASTM E814 (UL1479)
  • CAN/ULC-S115

Specified Divisions

  • Division 7, 07 84 13, Penetration Firestopping
  • Division 22, 22 00 00, Firestopping for Plumbing
  • Division 26, 26 00 00, Electrical
  • Division 27, 27 00 00, Communications

Product Video

Documents

FP Intumescent Firestop Plug Documents

Specifications

SpecSeal FP Intumescent Firestop Plug Specifications

Q & A

true

Ratings & Reviews

No reviews available

Be the first to Write a Review