About This Product

Details

Titebond Metal Roof Clk-Colors per 10 Ounce Std. Cartridge

Titebond WeatherMaster Metal Roof Sealant is specifically formulated to outperform all other sealant technologies, including VOC solvent, silicones, tri polymers, and urethanes. This superior polymer formula provides a weather-tight seal against water, wind, dust, and dirt. It offers exceptional adhesion to Kynar coated metal materials, along with standard metal, aluminum, steel, galvanized bonderized surfaces, plastics, and glass.

This product is ideal for use on a wide variety of metal roof, trim, architectural metal siding, aluminum, galvanized steel, galvanized gutters, flashing and downspouts. It also provides unbeatable adhesion to wood, masonry, PVC and most common building materials. Titebond WeatherMaster Metal Roof Sealant is available in over 50 colors, all of which match today’s popular metal roof and metal siding colors, regardless of material or manufacturer. If touch-ups are necessary, it may be painted* with a water-based (latex-based) paint one hour after application. It extrudes in extreme weather conditions (down to 0°F/-18°C) and is UV-resistant, making it the ideal choice for exterior applications. It will expand and contract with the change of weather and temperature and will not crack. This sealant contains no solvents or isocyanates and is VOC-compliant.

Benefits

Applies easily in extreme weather conditions
Excellent adhesion to most common building materials
Permanently flexible, weather-tight seal
UV-resistant
VOC-compliant
Compatible with all types of foam

Application Guidelines

APPLICATION TEMPERATURE:	Above 0°F (-18°C)
SERVICE TEMPERATURE RANGE:	-75°F to 300°F (-59°C to 149°C) white & colors, -40°F to 350°F (-40°C to 177°) translucent
METHOD OF APPLICATION:	Cartridge/caulking gun, bulk/sausage gun
TOOLING TIME:	For a 1/4" bead, approximately 10-15 minutes, depending on temperature and humidity.
WORKING SURFACES:	Surfaces must be cleaned down to the original substrate and free from any material that may prevent adhesion. It is the sole responsibility of the user to thoroughly test any proposed use with all substrates to determine project suitability. To ensure neat sealant lines, mask areas adjacent to joints.
PAINTING:	WeatherMaster Metal Roof is intended for exterior use. If used indoors, sealant may need to be painted*. Painting may occur one hour after application with a water-based (latex-based) paint. For other paint types, a compatibility test is recommended. To ensure neat sealant lines, mask areas adjacent to joints.
CLEANUP:	Uncured material may be cleaned with isopropyl alcohol.† After curing, excess sealant must be cut or scraped away. Follow solvent vendor’s precautions when using solvents.
LIMITATIONS:	Air, sealant and surface temperature should be above 0°F(-18°C). WeatherMaster Metal Roof Sealant is intended for exterior use. If light colors are used indoors, sealant must be painted*. Painting may occur one hour after application with a water-based (latex-based) paint. For other paint types, a compatibility test is recommended. To ensure neat sealant lines, mask areas adjacent to joints. Always apply sealant in a bead form. Once sealant is applied, do not wipe with solvents. Once sealant is dry to the touch and does not transfer, remove masking tape. If joint depth exceeds 1/2”, use backing material. Not designed for continuous submersion or use below the waterline. Store unused product in dry location at or below 75°F (24°C).

Q & A

true

Popular Searches

Product suggestions

Titebond Metal Roof Clk-Colors per 10 Ounce Std. Cartridge

Better Together

Buy all 4

About This Product

Details