GE SilPruf LM SCS2700 Sealant Fixed Tip 10 Ounce Cartridge

• Low-modulus, neutral-cure formula for reduced stress in working joints
• +100%/-50% movement capability, with excellent extension and compression cycling recovery
• Proven long-term resistance to extreme temperatures, UV radiation, rain, and snow, with negligible change in elasticity
• Once cured, remains elastic in temperatures from -55°F (-48°C) to 250°F (121°C)

• Ultra-low VOC (volatile organic compound) content
• Exceeds LEED program requirements

• Easy to apply and tool in hot and cold conditions
• Can be applied in temperatures as low as 40°F (4°C). Substrate surface should be less than 122°F (50°C)
• Primerless adhesion to most substrates and finishes
• Extended work life to allow time for placement and tooling
• Low-sag formula remains in place until fully cured

• Aluminum Gray
• Black
• Bronze
• Limestone
• Precast White
• White

• (1) GE SilPruf LM SCS2700 Sealant Fixed Tip 10 Ounce Cartridge (this item)

Other Sizes

• GE SilPruf LM SCS2700 Sealant 20 Ounce Sausage

• Environmental VOC+ Product Certification
• Clean Air Gold Certification
• GE Product Certificate SCS2700 SilPruf* LM

• TT-S-001543A
• TT-S-00230C
• CAN/CGSB-19.13-M87

SCS2700 is not recommended:

• In structural glazing applications.
• In designs where the silicone is encapsulated and without access to atmospheric moisture (this material requires atmospheric moisture to cure from paste to rubber).
• Underwater or in other applications where the product will be in continuous contact with water.
• In food contact applications.
• On porous substrates or surfaces with special protective or decorative coatings, where staining or discoloration may be a concern, without prior testing and consultation with MPM Technical Services.
• When painting of the cured sealant is desired (unless coating with GE SilShield silicone coating products).
• Under exceedingly hot or cold conditions (see Sealant Application section for additional information).
• On wet, damp, frozen or contaminated surfaces.
• On excessively basic or acidic substrates