Mfr:W.R. Meadows

Meadows Mel-Rol LM 5 Gallon Pail

Name: Meadows Mel-Rol LM 5 Gallon Pail
SKU: MEADMELROLLM.5P*NA
Price: 205.5 USD
Availability: BackOrder

(0)(0)

Item #: MEADMELROLLM.5P*NA

Mfr. Part #: 6511005

Q&A(0)

Roll Over To Zoom

$205.50

MEL-ROL LM is a single-component, polymer modified, cold-applied, water-based, liquid waterproofing membrane ideal for below-grade vertical seamless waterproofing applications. We have taken the same high quality rubber polymers found in W. R. MEADOWS’ successful MEL-ROL “pe...

View More Details

Tech Data SheetSafety Data Sheet

About This Product

Details

MEL-ROL LM is a single-component, polymer modified, cold-applied, water-based, liquid waterproofing membrane ideal for below-grade vertical seamless waterproofing applications. We have taken the same high quality rubber polymers found in W. R. MEADOWS’ successful MEL-ROL “peel and stick” membrane and converted them into a heavy-bodied, high solids, quick drying liquid membrane.

With MEL-ROL LM, installation time is reduced, utilizing either a spray or roller application. A variety of different protection courses, insulation boards, or drainage boards can be embedded into the membrane to create a superior waterproofing system. With the application of PERMINATOR® vapor barrier over the membrane, a composite system can be created that has the combined advantages of both “peel and stick” and liquid-applied membranes.

Features & Benefits

Waterproof – very low vapor permeability (perm rating).
Superior elongation – bridges minor cracks; will not become brittle with age.
Fully bonded – water will not run beneath the membrane.
High solids, single-component, fast drying formulation – easy to apply; low-cost application equipment; eliminates two-component mixing problems.

Cold-applied/water-based – will not adversely affect insulated forms (ICFs) or various protection board options. Allows for application to damp or “green concrete.”
VOC content is 0.0 g/L. Produces no harmful odors.
Easy application – no heating necessary. Eliminates fire hazards associated with heating kettles. Apply with roller or airless sprayer.

Applications

MEL-ROL LM can be used on new and remedial waterproofing applications on concrete or masonry block substrates. Since the formula is water-based, MEL-ROL LM can also be used on both ICFs and “green concrete” applications.

Packaging

(1) Meadows Mel-Rol LM 5 Gallon Pail

Certifications

Complies with all current federal, state, and local maximum allowable VOC requirements, including National EPA VOC Emission Standard for Architectural Coatings, CARB, LADCO, OTC Phase I and II, and SCAQMD.

Limitations

Do not allow containers to freeze. If containers are subjected to temperature below 32°F (0° C), do not apply.
Do not apply MEL-ROL LM if rainfall is forecast or imminent within 12 hours at 77° F (23° C). Colder temperatures will increase dry time. For horizontal applications, HYDRALASTIC 836 is recommended.
Do not apply MEL-ROL LM or primer when air, material, and surface temperatures are expected to fall below 40Û F (4.4° C) within four hours of completed application. Protect the applied material from freezing for 24 hours. Sprayed urethane foams applied over MEL-ROL LM can melt the membrane and cause delamination and failure due to the exothermic reaction that takes place after spraying the foam. These foams should not be sprayed over MEL-ROL LM. The use of MEL-ROL LM does not negate the need for relief of hydrostatic heads. A complete drain tile system should be placed around the exterior of footing and under slabs, as required.

Product Video

Documents

Meadows MEL-ROL LM Documents

Specifications

Meadows MEL-ROL LM Specifications

Q & A

true

Back

Popular Searches

Product suggestions