Skip to main content
  • Home
  • Euclid Dural 335 5 Gallon Unit

Mfr:Euclid Chemical

Euclid Dural 335 5 Gallon Unit

(0)(0)
Item #: EUDURAL335.5U*NA

Mfr. Part #: TD5338405

Q&A(0)

Roll Over To Zoom

$899.68

This is a hazardous item and will incur additional shipping charges at checkout.

DURAL 335 is a solvent-free, two-component, 100% solids, moisture insensitive, ultra-low viscosity epoxy penetrating healer-sealer for damp and dry cracks.Features & BenefitsPenetrating epoxy crack healer/sealerAlternative to methyl methacrylatesSolvent free, no odorUltra-lo...

View More Details

On Back Order

Available: 0

Case Quantity: 1

Location

Available

Anaheim, CA

0

Burbank, CA

0

Denver, CO

0

Ontario, CA

0

Salt Lake City, UT

0

San Diego, CA

0

San Marcos, CA

0

Calculate Material Usage:

Sealant Calculator

(*) Minimum Quantity: 1

About This Product

Details

DURAL 335 is a solvent-free, two-component, 100% solids, moisture insensitive, ultra-low viscosity epoxy penetrating healer-sealer for damp and dry cracks.

Features & Benefits

  • Penetrating epoxy crack healer/sealer
  • Alternative to methyl methacrylates
  • Solvent free, no odor
  • Ultra-low viscosity
  • High strength
  • Moisture insensitive
  • Protects treated surface from salts, chemicals, and water absorption

Applications

  • Bridge decks
  • Airport runways
  • Roadways
  • Parking garage decks and ramps
  • Re-bonding of delaminated concrete toppings
 

Packaging

  • Euclid Dural 335 5 gallon unit (this item)

Testing Standards

  • DURAL 335 complies with ASTM C881 Types I and IV, Grade 1, Class C
  • Canadian MTQ
  • Canadian Food Inspection Agency compliant

Limitations

  • Store DURAL 335 indoors, protected from moisture, at temperatures between 50 °F and 90 °F (10 °C and 32 °C)
  • Surface and ambient temperature during coating applications should be between 50 °F and 90 °F (10 °C and 32 °C)
  • Temperature of DURAL 335 should be at least 50 °F (10 °C)
  • Do not apply DURAL 335 if surface temperature is within 5 °F (3 °C) of the dew point in the work area
  • Working time and cure time will decrease as the temperature increases, and will increase as the temperature decreases
  • Do not thin DURAL 335
  • Do not apply DURAL 335 if the substrate or cracks are subject to hydrostatic pressure
  • Although DURAL 335 is chemically resistant, surface staining of the coating may occur after contact with some chemicals. Consider the use of a urethane topcoat such as EUCOTHANE for improved stain resistance.
  • Application of a test area is recommended to confirm final appearance and texture of the system with the end user
  • Do not mix or apply DURAL 335 when rain is expected within 12 hours after application
  • Multiple applications of DURAL 335 must be done within 24 hours of the preceding application
  • DURAL 335 will darken substrate upon application
  • Excess DURAL 335 left on the surface will reduce skid resistance
  • In all cases, consult the product Safety Data Sheet before use

Documents

DURAL 335 Documents

Specifications

DURAL 335 Specifications

Q & A

true
Warning: This product contains a chemical known to the State of California to cause reproductive harm.
For more information go to www.p65warnings.ca.gov
Back

Ratings & Reviews

No reviews available

Be the first to Write a Review