Mfr:Miracote
Miracote Miraflor CR-N Pigmented Novolac Epoxy per 5 Gallon Unit - Dark Gray
Mfr. Part #: 7220-3GPA-DARK GRAY / 7221-2GPB
Roll Over To Zoom
Miracote MiraFlor CR is a highly chemical resistant, slip-retardant coating for application over concrete or as the finish coating for MiraFlor CQ Clear Epoxy. Formulated using the most advanced normal-epoxy chemistry, MiraFlor CR produces a tighter "cross-linking" than conv...
View More DetailsAbout This Product
Details
Miracote MiraFlor CR is a highly chemical resistant, slip-retardant coating for application over concrete or as the finish coating for MiraFlor CQ Clear Epoxy. Formulated using the most advanced normal-epoxy chemistry, MiraFlor CR produces a tighter "cross-linking" than conventional epoxies.
As a result, the material resists physical attack from the spillage of a very wide range of acids, alkalis and solvents. It also resists staining from the spillage of many chemicals, which would discolor ordinary epoxies. Due to its specialized chemistry, MiraFlor CR is premium priced compared to conventional epoxy floor coatings and should be used only where its superior properties are required.
MiraFlor CR is available in five different slip-retardant "profiles" ranging from very coarse to very fine. Selection of profiles to be used depends upon the degree of slip-retardance required, the cleaning characteristics desired and the area of use. Formulated with environmental requirements in mind, MiraFlor CR contains no hydrocarbon solvents and thus meets all state and local volatile organic substance regulations. MiraFlor CR has no significant odor during installation.
- Meets or exceeds USDA inspection requirements
- Resists wider range of chemical spillage than conventional epoxies
- Heat resistant
- No significant odor during installation
- Wide range of color and profile selections
MiraFlor CR is a three component material consisting of normal epoxy resin, catalyst and special metallic, oxide, slip-retardant aggregates. The three components are mixed together immediately prior to application and the material is then troweled into place. The final coating is applied by roller.
Applications
- Classrooms
- School Cafeterias and Kitchens
- Media Centers
- School Locker Rooms and Restrooms
- Laboratories
- Bottling Lines
- Mixing Lines
- Bakeries and Dairies
- Meat Packing Areas
- Kitchens
- Coolers
- Wineries
- Emergency Rooms
- Clean Rooms
- Patient Rooms
- Hospital Cafeterias
- Mechanical Rooms
- Assembly Lines
- Loading Docks
- Control Rooms
- Chemical Storage Areas
- Plant Locker and Shower Rooms
- Plant Cafeterias
- Kitchens and Bathrooms
- Garage Floors
- Supermarkets
- Restaurants
- Lobbies
- Shopping Malls
- Automobile Dealerships
- Stadium Concessions
Documents
Specifications
Q & A
For more information go to