Seal Boss 6060 QuickFix per 22 Ounce Cartridge - Gray

SealBoss 6060 QuickFix is an advanced polyurethane it is formulated low viscosity, rapid set, high strength, ultra low viscosity, self leveling, two component. It is 1:1 ratio by volume, and 100% solids repair material. This strong rigid material has been designed to fix spalled concrete surfaces, cracks, and to rebuild damaged control joints effectively.

SealBoss 6060 QuickFix works for concrete and asphalt repairs. The product penetrates into small cracks which and forms a high strength adhesive bond between broken structures with the benefit of sealing the base against further erosion from water in outside applications. The tack free time is 5 to over 15 minutes depending on temperature. Exposure to sunlight (UV) may cause discoloration, however the physical properties are essentially unaffected. SealBoss 6060 QuickFix is slightly moisture sensitive and should be applied on dry surfaces.

• Heavy-Duty Formula
• Does not deflect under loads, protects edges from spalling.
• Rapid Setting
• Moderate traffic loads after fifteen (15) minutes,Full traffic after thirty (30) minutes. (70˚F/21˚C).
• Extremely Wide Temperature Range
• Use in coolers/freezers down to minus 20˚F(-29˚C), and temperatures up to 120˚F (49˚C).

Applications

SealBoss 6060 QuickFix Pro Spall Repair is designed to repair spalled joints, fill horizontal cracks and patch holes and surface defects. SealBoss 6060 QuickFix can be used to fill and protect joints in industrial concrete floors that are subject to heavy loads and hard wheels. The product supports the structures with minimal deflecting. SealBoss 6060 can be used in ambient temperature and or freezer applications.