Seal Boss 1403 Flex Part B

SealBoss 1403 SLV Resin Part B is part of a low viscosity, two component, hydrophobic MDI polyurethane based resin on a MDI polyurethane. The product is 100% solids and solvent free. The gel time of the product can be decreased by adding a SealBoss 1400 Catalyst.

This high grade injection resin is designed for application in damp and dry cracks. Unlike water activated products, SealBoss 1403 SLV Resin does not need any moisture for the reaction. The super low viscosity of 70 cps permits for excellent penetration into fine hairline cracks. Good adhesive properties and product flexibility minimize formation of new cracks in the structure. The cured resin is inert to wet and dry cycles, it does not shrink or swell. SealBoss 1403 SLV Resin may slightly foam in contact with moisture in a pressure free environment. Under pressure SealBoss 1403 SLV Resin cures to a dense and flexible sealant. The product is non-corrosive and safe for use in combination with foils and joint strips. The product is an excellent finishing product for areas previously injected with expanding foam, where minor leaks or dampness may persist.

• SealBoss Product-Pump-Packer System Solution
• Deep Penetration - 70 CPS SLV
• Full Cure in Dry & Damp Conditions
• Flexible, Moisture Insensitive, 2 Comp. Formula
• Unregulated For Transport
• This Product is for Professional Use

Applications

• Follow-Up Injection of Water Stop Foam Injection
• Hairline Crack Injection
• Sealing Concrete Cracks & Joints
• Sealing Concrete Construction Joints
• Brick Construction
• Waste Water Tanks
• Sewers, Manholes, Utility Boxes, etc.
• Tunnels, Dams, Bridges
• SealBoss Inject Tube System 2000