• Home
  • Titebond Weathermaster Sealant - Crystal Clear

Mfr: -

Titebond Weathermaster Sealant - Crystal Clear

(0)(0)
Item #: TIWM-CC.SC*1095

Mfr. Part #: 43991A

$12.11

Titebond Weathermaster Sealant - Crystal Clear Titebond WeatherMaster Sealant has been specifically formulated to outperform all other sealant technologies, including silicones, tri polymers and urethanes. This superior polymer formula provides the best possible performance ...

View More Details

In Stock

Available: 34

Location

Available

San Diego

2

Anaheim

32

Denver

0

Salt Lake

0

Ontario

0

San Marcos

0

(*) Minimum Quantity: 12

About This Product

Details

Details

Titebond Weathermaster Sealant - Crystal Clear

Titebond WeatherMaster Sealant has been specifically formulated to outperform all other sealant technologies, including silicones, tri polymers and urethanes. This superior polymer formula provides the best possible performance on siding, windows, doors, and vents. In addition to offering permanent flexibility, it provides unbeatable adhesion to wood, masonry, PVC, fiber cement, siding/trim, and most common building materials. WeatherMaster Sealant is available in over 175 colors, all of which match today’s popular siding colors, regardless of material or manufacturer. If touch-ups are necessary, it may be painted with a water-based premium grade paint.* It is weather-resistant, extrudes in extreme weather conditions and is UV-resistant, making it the ideal choice for exterior applications. Safety is not compromised, as this sealant contains no solvents or isocyanates. This product is VOC-compliant.

Features and Benefits

  • OUTPERFORMS SILICONE, TRIPOLYMER AND URETHANE SEALANTS
  • APPLIES EASILY IN EXTREME WEATHER CONDITIONS
  • PERMANENTLY FLEXIBLE, WEATHER-TIGHT SEAL
  • MOLD AND MILDEW RESISTANT
  • CAN BE PAINTED WITH WATER-BASED (LATEX-BASED) PAINT ONE HOUR AFTER APPLICATION*
  • SUPERIOR POLYMER TECHNOLOGY
  • FILLS GAPS UP TO 1 INCH WIDE
  • UV-RESISTANT
  • UV-RESISTANT
  • COMPATIBLE WITH ALL TYPES OF FOAM

Application Guidelines


APPLICATION TEMPERATURE:
  • Above 0°F (-18°C)
  • SERVICE TEMPERATURE RANGE:
  • -75°F. to 300°F (-59°C to 149°C) white & colors, -75°F to 250°F (-59°C to 121°C) crystal clear (may discolor at higher temperatures), -40°F to 400°F (-40°C to 204°C) translucent
  • METHOD OF APPLICATION:
  • Cartridge/caulking gun
  • TOOLING TIME:
  • For a 1/4" bead, approximately 10-15 minutes, depending on temperature and humidity.
  • WORKING SURFACES:
  • Surfaces must be cleaned down to the original substrate and free from any material that may deter adhesion. It is the sole responsibility of the user to thoroughly test any proposed use with all substrates to determine project suitability prior to using product on your application. If application is for Kynar™ coated materials, use WeatherMaster Metal Roof Sealant.
  • PAINTING:
  • WeatherMaster is intended for exterior use. If used indoors, sealant may need to be painted*. Painting may occur one hour after application with a water-based (latex-based) paint. For other paint types, a compatibility test is recommended. To ensure neat sealant lines, mask areas adjacent to joints.
  • CLEANUP:
  • Uncured materials may be cleaned with isopropyl alcohol (white and colors). Mineral spirits or similar solvent (clear). After curing, excess sealant must be cut or scraped away. Follow solvent vendor’s precautions when using solvents.
  • COVERAGE:
  • Sealant Calculator
  • LIMITATIONS:
  • Air, sealant and surface temperature should be above 0°F(-18°C). WeatherMaster is intended for exterior use. If used indoors, sealant must be painted*. Painting may occur one hour after application with a water-based (latex-based) paint. For other paint types, a compatibility test is recommended. To ensure neat sealant lines, mask areas adjacent to joints. Always apply sealant in a bead form. Once sealant is applied, do not smear, feather or wipe with solvents. Once sealant is dry to the touch and does not transfer, remove masking tape. If joint depth exceeds 1/2”, use backing material. NOTE: Highly recommend using backer rod/backing material for all joints. Not designed for continuous submersion or use below the waterline. Store unused product in dry location at or below 80°F (27°C). Do not apply WeatherMaster Translucent to polycarbonate due to solvent cracking. Not for use with nail holes or butt joints. For questions, please call our Help Line at 1-800-347-4583
  • Ratings & Reviews

    No reviews available

    Be the first to Write a Review