Tufflex Elasta-Tuff 6000 AL SC 100 VOC 1 Gallon Unit

ELASTA-TUFF 6000-AL SC is a single component, liquid applied, moisture curing, aliphatic polyurethane industrial maintenance coating. It is used as the Top Coat for most of the polyurethane deck coating systems supplied by TUFFLEX Polymers (TUFFLEX). ELASTA-TUFF 6000-AL is used in those areas where a low VOC, mild to medium solvent containing coating is required by regional EPA regulations.

• Single component application, vulcanized by moisture
• Non-yellowing with excellent weathering properties
• Excellent water resistance, good chemical resistance
• Rapid cure at room temperatures and can be accelerated for low temperature or low humidity cure
• High hiding with one coat application
• Easy cost saving application
• Color stable aliphatic urethane backbone
• Eliminates migratory water problems
• Quick turn-around time with the use of TUFFLEX accelerators
• High abrasion resistance

Applications

ELASTA-TUFF 6000-AL is the abrasion-resistance and weather resistant Top Coat used in most of the ELASTA-TUFF Vehicular Traffic Bearing and Pedestrian Deck Coating Systems. Please refer to the pertinent Installation Specification Data Sheet on each of these systems. ELASTA-TUFF 6000-AL is used where optimum weather resistance, abrasion resistance and color stability are required. It is used in conjunction with ELASTA-TUFF 5000 and ELASTA-TUFF 5000-HT Base Membranes and Intermediate Membranes. The cured top coat easily withstands the extreme environmental conditions encountered in exterior construction environments. When used in conjunction with elastomeric base membranes, the ELASTA-TUFF 6000-AL composite system contracts with lower temperatures and readily expands when temperatures increase. ELASTATUFF 6000-AL may also be used alone as an abrasion-resisting industrial maintenance coating.

Colors

• Pacific Gray
• Sidewalk Gray
• Rocky Gray
• Monterey Sand
• Ash Brown
• Desert Tan

Packaging

• 1 gallon pail
• 5 gallon pail