SpecSeal Series 33 EZ Path Device Extension
Mfr. Part #: EZD33E
Roll Over To Zoom
Series 33 EZ Path Device Extension modules attach to the end(s) of the Series 33 pathway and increase the effective length for thicker barriers. Each extension module increases the effective length by 6 in. (152 mm). Extensions work with all other accessories.The EZ Path Ser...View More Details
About This Product
Series 33 EZ Path Device Extension modules attach to the end(s) of the Series 33 pathway and increase the effective length for thicker barriers. Each extension module increases the effective length by 6 in. (152 mm). Extensions work with all other accessories.
The EZ Path Series 33 Fire-Rated Pathway is a maintenance-free pathway solution for moderate cable volumes through fire-rated walls and floors. The Series 33 incorporates built-in intumescent pads that automatically adjust to cable fills. When exposed to flame and high temperatures, the intumescent pads expand to form a dense insulative char that prevent the passage of smoke and flame.
The Series 33 Pathway is designed for the new or existing cable installations up to 9 in. (229 mm) thick walls for floors. The Series 33 pathway can be ganged for additional capacity. A wide variety of accessories easily adapts 33 Series pathways to a broad range of applications.
- Easy to install
- No firestopping required
- Acoustically tested
- Firestopped at all stages of use
- UL tested - low leakage
- UL Certified for the complete range of its capacity
- Pathways can be ganged for additional capacity
- Permits cable segregation by use, type, vendor
- Match the capacity of a 4” (102 mm) conduit
- Cable Tray
EZ Path Series 33 Fire Rated Pathway is designed for easy installation in floors and walls. Tested and approved cable capacities range from 0 to 100% visual fill. EZ Path Series 33 Fire Rated Pathway when installed with available wall plates is designed for new cable installations. In these installations, the device does not require mechanical attachment to either the wall or the wall framing and may be installed after the wallboard has been installed. EZ Path’s split body design also allows the device to be easily disassembled and installed around previously installed cables in existing construction.
All data, video, and communications cable bundles shall utilize an enclosed fire-rated pathway device wherever said cables penetrate rated walls. The fire-rated pathway shall contain a built-in fire sealing system sufficient to maintain the hourly fire rating of the barrier being penetrated. The self-contained sealing system shall automatically adjust to the installed cable loading and shall permit cables to be installed, removed, or retrofitted without the need to remove or reinstall firestop materials. The pathway shall be UL Certified and/or FM Systems Approved and tested to the requirements of ASTM E814 (UL1479) and CAN/ULC-S115.
- ASTM E814 (UL1479)
- Division 7, 07 84 13, Penetration Firestopping
- Division 26, 26 00 00, Electrical
- Division 27, 27 00 00, Communications
Shipping & Returns
Sunshine Supply prides itself on providing only the best waterproofing products to the construction industry. Unfortunately, products we offer may not always meet our customers expectations. If this is the case, we are happy to accept your return and help you find a product that better fits your needs. (see return policy below)
If the reason for your return is a result of a mistake made by Sunshine Supply, we will provide a full product refund along with all tax, shipping, and handling fees applicable to your sale. Return shipping, if necessary, will be processed and scheduled by Sunshine Supply. Please, do not send back your products without consulting a customer service representative first to ensure a quick and easy refund.
Please inform Sunshine Supply immediately if any of your items are missing or damaged upon arrival. Make sure to notate all damages on the shipping receiver from our carriers or Sunshine Supply’s packing slip.
In the event we are unable to accept return of a product due to damage or leaking material. Sunshine Supply will provide a full refund, assuming it meets eligibility of our return policy, but expect the customer to dispose of the materials following all Southern California disposal guidelines.
Returns are fast and easy, but we do have a couple exceptions for products to be eligible for return. The exceptions are as follows:
- The original purchase date must be 30 days or less. Returns may be subject, but not limited to, a 20% restock fee if the return is made after 30 days. Returns older than 60 days will not be accepted.
- The product is in original, unopened manufactures packaging.
- The product is not expired or close to its expiration date.
- If applicable, product lot/batch number is clearly visible and matching the original sale lot/batch number.
- Not all returns are the same and it is difficult to outline every instance that meets return eligibility. If your return does not meet the requirements above please give us a call and we will attempt to remedy the situation in some other way. The satisfaction of our customers is Sunshine Supply’s top concern.
Here is some legal jargon from our Terms and Conditions:
RETURN OF PRODUCTS
Sunshine Supply Co., Inc. is under no obligation to accept return of products purchased by customer whether or not they are special order. Sunshine Supply Co., Inc. may, in its sole discretion, accept a return of products and provide a credit to the customer’s account if (I) the products were purchased from Sunshine Supply Co., Inc., (II) the product is not visibly defective or impaired or have expired expiration dates, (III) the product is returned within thirty (30) days of the date of sale, and (IV) the product is in the original manufacturer’s packaging with Lot/Batch number clearly legible and matching the original sale. If Sunshine Supply Co., Inc. accepts the return of product, a restocking fee of 20% of the purchase price shall be deducted from all credited amounts from all stock, non-stock, or special order product. Additional limitations or costs may be imposed upon their return including those required by the manufacturer of the product.