S-8500 Super-Krete Clear Seal 1 Gallon Unit
Mfr. Part #: SKCLEARSEAL001
Roll Over To Zoom
S-8500 Clear Seal is a low-gloss, non-yellowing, penetrating acrylic/urethane sealer formulated to create an impervious protective shield over Super-Krete overlays that also resists staining, petroleum and most chemicals. Used as an interior or exterior finish, S-8500 Clear ...
View More DetailsAbout This Product
Details
S-8500 Clear Seal is a low-gloss, non-yellowing, penetrating acrylic/urethane sealer formulated to create an impervious protective shield over Super-Krete overlays that also resists staining, petroleum and most chemicals. Used as an interior or exterior finish, S-8500 Clear Seal is environmentally friendly, VOC compliant, non-toxic, OSHA and FDA compliant.
Although used primarily on decorative surfaces for protection against foot traffic, it can also be used as a protective shield over walls, structures and other coated and painted surfaces for protection against mildew, mold and resistance to ultraviolet. S-8500 Clear Seal is the perfect sealer for protecting any surface from light to moderate foot traffic conditions while providing a uniform surface appearance and enhancing underlying colors.
- Ease of application of acrylics
- Performance of urethanes
- Penetrates surface for tenacious bond
- Easy to clean and maintain
- Water-based
- Resistant to UV rays
- Resists Staining
- Low gloss finish
- Water repellent
- VOC compliant
- Environmentally friendly and safe
- FDA compliant
- Breathable
- OSHA Compliant, contains no ingredients required to be listed by OSHA CFR 1910 1200
Applications
- Super-Krete overlays
- Exposed Aggregate
- Stamped Concrete
- Pedestrian/Light Traffic Areas
- Pool Decks
- Pavers
- Stucco
- Concrete/Masonry walls
- Tile & Stone
- Walkways/Landings
- New/Existing Concrete
- Decorative Walls/Murals
- Precast Concrete
- Residential/Commercial
- Kitchens/Restaurants when waxed
Packaging
- 1 gallon bottles
- 5 gallon pails
- 55 gallon drums
Limitations
- Super-Krete Products are to be applied only when surface temperatures are above 55°F and rising and not to exceed 100°F. Super-Krete Products are not to be applied when precipitation is expected within 24 hours following completion of application. Do not allow materials to freeze. Each Super-Krete product acts as an inherent part of a proven system. Super-Krete Products are professional, contractor grade products. Training in the use of these products is available. Consult a Super-Krete Products representative for information and assistance locating approved contractors in your area or for training class dates.
Documents
Specifications
Q & A
For more information go to