Sikadur Injection Gel per 4 Gallon Unit

Name: Sikadur Injection Gel per 4 Gallon Unit
SKU: SIKDURINJGEL.4U*NA
Price: 457.7 USD
Availability: BackOrder

(0)(0)

Item #: SIKDURINJGEL.4U*NA

Mfr. Part #: 107732

Q&A(0)

Roll Over To Zoom

$457.70

Sikadur Injection Gel Standard Set is a 2-component, 100 % solids, moisture-tolerant, high-modulus, high-strength, structural epoxy. When mixed it gives a smooth, non-abrasive, paste adhesive. It conforms to the current ASTM C-881, Types I and IV, Grade-3, Class-C and AASHTO...

View More Details

Tech Data SheetSafety Data Sheet

About This Product

Details

Sikadur Injection Gel Standard Set is a 2-component, 100 % solids, moisture-tolerant, high-modulus, high-strength, structural epoxy. When mixed it gives a smooth, non-abrasive, paste adhesive. It conforms to the current ASTM C-881, Types I and IV, Grade-3, Class-C and AASHTO M-235 specifications.

Unique, non-abrasive texture permits application with automated pressure-injection equipment
Tolerant of moisture before, during, and after cure
High-modulus, high-strength, structural-paste adhesive
Excellent adhesion to masonry, concrete, wood, steel and most structural materials
Paste consistency ideal for vertical and overhead grouting of cracks
Convenient easy mix ratio A:B = 1:1 by volume
Excellent lubricity for deep penetration
Sikadur Injection Gel fast set is approved for short term loads only. Consult a design professional prior to use
Gray

Applications

Structural crack repairs not exceeding 1/4 in. (6 mm) width
Mechanical grouting. . . bolts, dowels, pins, machine and ‘robotic’ base plates, bearing pads, etc.
Waterproofing tunnels, cable vaults, tanks, basements, etc.
Re-anchoring of veneer masonry. Consult a design professional prior to use
Wood-truss repairs
Preventive maintenance - grout large cracks on new or existing structures to seal off reinforcing steel from the elements of corrosion
Anchor grouting . . . bolts, dowels, pins and special fasteners. Consult a design professional prior to use
As a pick-proof sealant around windows, doors, lock-ups, etc. inside correctional facilities

Mixing

Sikadur Injection Gel, Standard Set is specially designed and formulated to be mixed and applied with automated pressure-injection equipment. Follow the recommendations and directions supplied by the equipment manufacturer.

Pre-mix each component. Proportion equal parts by volume of Component ‘B’ and Component ‘A’ into a clean pail. Mix thoroughly for 3 minutes with Sika paddle on low-speed (400–600 rpm) drill until uniform in color. Mix only that quantity that can be applied within its pot life.

Compressive Strength

	*40°F (4°C)**	*73°F (23°C)**	*90°F (32°C)**
4 hours	-	-	300 psi (2.1 MPa)
8 hours	-	300 psi (2.1 MPa)	6,500 psi (44.8 MPa)
16 hours	100 psi (0.7 MPa)	7,500 psi (51.7 MPa)	7,000 psi (48.3 MPa)
1 day	1,400 psi (9.6 MPa)	8,000 psi (55.1 MPa)	9,500 psi (65.5 MPa)
3 days	7,600 psi (52.4 MPa)	8,500 psi (58.7 MPa)	10,000 psi (68.9 MPa)
7 days	9,000 psi (62.1 MPa)	9,000 psi (62.1 MPa)	10,000 psi (68.9 MPa)
14 days	10,000 psi (68.9 MPa)	10,000 psi (68.9 MPa)	10,000 psi (68.9 MPa)
28 days	10,000 psi (68.9 MPa)	10,000 psi (68.9 MPa)	10,000 psi (68.9 MPa)
*Cured and tested at the temperatures indicated.