SpeedCove Integral Cove Base Molding 4'' x 48''

SpeedCove Base Moulding 4" x 48" is a high performance substrate that is always coated with a professional grade non-absorbent polymer (resinous) finish to any thickness or color required, and monolithically integrated into the floor.

• Extremely versatile for use with all types of finishes & applications including epoxy quartz & flake, polyurethanes, polyaspartics, polyureas, mma's, cementitious overlays, build-ups & more
• Creates a permanent (integral) water and chemical proof joint between the wall and the floor
• Made of high performance (and high bond strength) proprietary resin with a micro-porous anchor profile on all three sides for maximum adhesion to commercial /industrial standards
• It creates the correct shape and height required by Environmental Health Department and it forms a seamless containment system within a room down to the drain
• The recommended amount is the minimum required to achieve a full spread with a 1/8" notch trowel for smooth surfaces, or a larger notch trowel for rough surfaces

Recommended Adhesives

• Sikaflex 1a
• Sikaflex 11 FC