Skip to main content
  • Home
  • SealBoss 1510 Polyurethane Injection Grout 5 Gallon Pail

Mfr:SealBoss

SealBoss 1510 Polyurethane Injection Grout 5 Gallon Pail

(0)(0)
Item #: WPB1510.5P*NA

Mfr. Part #: B1510-5

Q&A(0)

SealBoss 1510 Water Stop Foam mixed with SealBoss 15x Accelerator is a hydrophobic water-activated, (hydroactive), water cut-off grout and foam seal grout based on a MDI polyurethane. The resin is 100% solvent free and 100% solids. The gel-time of the product is adjustable b...

View More Details

In Stock

Available: 186

Location

Available

Anaheim, CA

45

Burbank, CA

55

Denver, CO

10

Ontario, CA

10

Salt Lake City, UT

32

San Diego, CA

34

San Marcos, CA

0

Calculate Material Usage:

Sealant Calculator

(*) Minimum Quantity: 1

Better Together

Buy all 4

Subtotal $812.22

About This Product

Details

SealBoss 1510 Water Stop Foam mixed with SealBoss 15x Accelerator is a hydrophobic water-activated, (hydroactive), water cut-off grout and foam seal grout based on a MDI polyurethane. The resin is 100% solvent free and 100% solids. The gel-time of the product is adjustable by the mandatory adding of a certain percentage of SealBoss 15x Accelerator. A phthalate free formulation (F) is available. SealBoss 1510 WaterStopFoam is NSF/ANSI 61 Drinking Water Contact Approved.

Upon contact with water SealBoss 1510 WaterStopFoam reacts to a semi-flexible foam while expanding its volume 30 to 40 times based on accelerator concentration. The cured material is of a constant volume. Since water is not a component of the foam structure, the cured material is essentially not effected by water or dryness. The reacted material essentially does not shrink or swell.

Depending on the amount of accelerator added and the pressure of injection, SealBoss 1510 WaterStopFoam reacts to a dense, closed cell, semi rigid material or a more open cell, semi flexible product. For best waterproofing results the closed cell structure is desired. SealBoss 1510 WaterStopFoam is designed for sealing water leaks and cutting off gushing water. Due to the low viscosity of the material, SealBoss 1510 WaterStopFoam offers good penetration in hairline crack injection. The product can be used for the filling of voids, cracks, and honeycombing in stone or concrete structures, and can be applied as a nonshrink, high strength soil stabilization grout when used with a reduced accelerator ratio. The moisture content of the soil must be sufficient to ensure reaction. To achieve most satisfying and permanent results in certain applications, a combination of SealBoss 1510 WaterStopFoam with other systems of our product line may be advised. Ask your SealBoss technician for details. This product is for professional use.


Features & Benefits

  • NSF / ANSI 61 Certified Drinking Water Contact
  • Advanced Formulation
  • Up to 40 Times Expansion
  • SealBoss Product-Pump-Packer System Solution
  • Unregulated For Transport
  • Advanced Solvent Free MDI Formulation
  • This Product is for Professional Use

    Applications

    • Defective Concrete (Cracked or Honeycombed)
    • Concrete Construction Joints & Cracks
    • Brick Construction, Geo Formations
    • Pipe Intrusions
    • Waste Water Tanks, Water Reservoirs
    • Tunnels, Dams, Soil Stabilization
    • Sewers, Manholes, Utility Boxes

    Packaging


    Certifications

    • NSF / ANSI 61 Certified Drinking Water Contact

    Product Video

    Documents

    SealBoss 1510 Documents

    Specifications

    SealBoss 1510 Specifications

    Q & A

    true

    Ratings & Reviews

    No reviews available

    Be the first to Write a Review