Meadows Deck-O-Seal Applicator Grade per 96 Ounce Kit

Meadows Deck-O-Seal Gun Grade

DECK-O-SEAL GUN GRADE is a two-component, non-sag, non-flowing and polysulfide-based sealing compound. It is a non-staining sealant that cures to a firm, flexible, and tear-resistant rubber. DECK-O-SEAL GUN GRADE is highly resilient and has excellent recovery characteristics, even after extended periods of compression or elongation. It has outstanding resistance to most chemicals, to all weather conditions, aging, and shrinkage. For on-the-job use, DECK-O-SEAL GUN GRADE is supplied in pre-measured kits containing the base compound and a separate container of setting agent, with enough room in the base container for blending both components.

Uses

DECK-O-SEAL GUN GRADE is a premium quality and flexible sealing compound for use in applications where short turn-around time is a requirement. Such as pool bottom, sidewall repairs, areas subject to pedestrian and vehicular traffic.

DECK-O-SEAL GUN GRADE can be used for general purpose caulking of joints and seams (both above and below water), glazing, weatherproofing, exterior curtain wall sealing, and interior/exterior expansion joint sealing. All submerged applications must be primed with P/G PRIMER from W. R. MEADOWS.

Features and Benefits

• Non-staining sealant cures to a firm, flexible, tear-resistant rubber.
• Highly resilient with excellent recovery characteristics.
• Outstanding resistance to most chemicals, all weather conditions, aging, and shrinkage.
• Ideal for short turn-around time applications, i.e. pool bottoms, sidewall repairs, and high pedestrian and vehicular traffic.
• Used for general purpose caulking, glazing, weatherproofing, and curtain wall and joint sealing.
• Supplied in unitized, pre-measured packaging (base and setting agent), ready for instant blending.