GE Enduris Liquid Flashing 2 Gallon Unit - Bright White

• High-solids formulation
• Best-in-class elongation
• Solvent-free
• 100% silicone
• Excellent adhesion
• Excellent long-term resistance to extreme temperatures, UV rays, rain, and snow

• Quickly attains weather-resistant properties
• Unaffected by ponding water
• Ready to use - no mixing or kneading
• Apply all year round – from 0°F to 120°F

• No mixing or primer required
• Applies with trowel, stiff brush, or gloved hand
• Ample open time allows for tooling to applied area
• Can be applied in temperatures ranging from 40°F to 120°F (-17°C to 49°C)
• High static viscosity to help ensure coating remains in place on high pitches, vertical surfaces, or parapets until it fully cures

• Enduris Liquid Flashing securely bonds to most roofing materials and substrates including single-ply, SPF, metal, concrete, and common parapet/coping materials. Asphaltic substrates such as modified bitumen, BUR, and granulated cap sheet may require bleed blocker to prevent staining.

• Bright White

• (1) GE Enduris Liquid Flashing 2 Gallon Unit - Bright White (this item)

• GE Enduris Roof Coating LEED Certification

GE Enduris Liquid Flashing should not be considered for::

• Use on pedestrian, deck or frequent traffic bearing surfaces
• Cold storage roofing application without vapor barrier, cryogenic tank applications or continuous water immersion services
• Unprepared surfaces including but not limited to those that are wet, dusty, oily, mildewed, heavily chalked, blistered or otherwise structurally unsound.
• Building materials that might bleed oil or solvents. These include, but are not limited to, certain vulcanized rubber products, tapes, failed sealants, some caulking compounds and asphaltic/mastic materials unless appropriate preparation or primers are used. Consult MPM technical services for primer recommendations.
• Surfaces where adhesion has not been verified by testing